;; Windows for Workgroups 3.11
;; SETUP.INF
;; Copyright (c) Microsoft Corporation, 1991-1993

[setup]
    help = config.hlp

;   Place any programs here that should be run at the end of setup.
;   These apps will be run in order of their appearance here.
[run]

[dialog]
    caption   = "Config do Windows"
    exit      = "Sair do Config do Windows"
    title     = "Instalando o Windows para Workgroups 3.11"
    options   = "Além de instalar o Windows para Workgroups 3.11, você pode:"
    printwait = "Aguarde enquanto o Config configura a(s) sua(s) impressora(s)..."
copywait="Bem-vindo ao Microsoft Windows para Workgroups 3.11!\n\n   - Caso o Windows seja novidade para você, consulte 'Um\n     breve roteiro do Microsoft Windows' no Guia do Usuário.\n\n"
copywait5="Certifique-se de registrar a sua cópia do Microsoft Windows \npara Workgroups 3.11. Como usuário registrado, você terá direito a:\n\n   - notificação de novos produtos e novas versões de produtos MS."

[data]
; Disk space required
; <type of setup>= <Full install space>, <Min install space>

    upd2x386full = 19000000,14000000 ; 19.0 Mb, 14.0 Mb     2.x -> WFW 3.11
    upd30386full = 14500000, 10500000 ; 14.5 Mb,  10.5 Mb     3.0 -> WFW 3.11
    upd31386full =  10500000, 7500000 ;  10.5 Mb,  7.5 Mb     3.1 -> WFW 3.11
    updWW386full =  6000000, 3500000 ;  6.0 Mb,  3.5 Mb     WFW 3.1  -> WFW 3.11
    updW1386full =  3000000, 2000000 ;  3.0 Mb,  2.0 Mb     WFW 3.11 -> WFW 3.11
    new386full   = 19000000,14000000 ; 18.0 Mb, 13.0 Mb

    netadmin     = 29000000          ; 29.0 Mb
    netadminupd  = 29000000          ; 29.0 Mb
    upd2x386net  = 1300000           ;  1.3 Mb
    upd30386net  = 1300000           ;  1.3 Mb
    upd31386net  = 1300000           ;  1.3 Mb
    new386net    = 1300000,1300000   ;  1.3 Mb,  1.3 Mb

; Defaults used in setting up and names of a few files
    startup   = WIN.COM
    defdir    = C:\WINDOWS
    defdevdir = C:\NET
    shortname = Windows
    welcome   = "Microsoft Windows para Workgroups 3.11"
    deflang   = ptg
    defxlat   = 850
    defkeydll = usxdll
    register  = "regedit /s /u setup.reg"
    tutor     = "wintutor.exe "
    winsetup  = "winsetup.exe"
    NetSetup  = FALSE
    MouseDrv  = TRUE
    partial   = FALSE
    Version   = "3.11.050"
    dosmemK   = 410

    ; MS-DOS Driver Versions
    ; These are the version numbers of the drivers that we are shipping
    ; with Microsoft Windows.
    himem.sys.hi     = 0x0310
    himem.sys.lo     = 0x0300
    smartdrv.exe     = 0x0500
    ramdrive.sys     = 0x18F5
    emm386.exe       = 0x0430

; This is data needed by the MS-DOS half of setup so that it can copy the
; proper kernel and start Windows for the GUI portion of setup.
;
; ** MS-DOS documentation says that first byte of command line for 4a call
; ** should be space. ==> in execcmd RHS leave first space as it is now
[winexec]
    execstd   = "dosx.exe "
    execcmd   = " krnl386.exe /b /q:"
    exechimem = "xmsmmgr.exe"
    himemcmd  = ""
    Krnl386   = 1:krnl386.exe
    dosx      = 2:dosx.exe

; Names of the disks Setup can prompt for.
[disks]
    1 =. ,"Disco 1 do Microsoft Windows para Workgroups 3.11",disk1
    2 =. ,"Disco 2 do Microsoft Windows para Workgroups 3.11",disk2
    3 =. ,"Disco 3 do Microsoft Windows para Workgroups 3.11",disk3
    4 =. ,"Disco 4 do Microsoft Windows para Workgroups 3.11",disk4
    5 =. ,"Disco 5 do Microsoft Windows para Workgroups 3.11",disk5
    6 =. ,"Disco 6 do Microsoft Windows para Workgroups 3.11",disk6
    7 =. ,"Disco 7 do Microsoft Windows para Workgroups 3.11",disk7
    8 =. ,"Disco 8 do Microsoft Windows para Workgroups 3.11",disk8
    9 =. ,"Disco 9 do Microsoft Windows para Workgroups 3.11",disk9


[windows]
    1:config.hlp  
    1:config.txt
    2:win.src,    Net
    2:system.src, Net
    1:winsetup.exe
    1:winhelp.exe
    1:control.hlp

[windows.system]
    1:gdi.exe
    1:user.exe
    1:win.cnf
    2:lzexpand.dll
    2:ver.dll
    2:shell.dll
    1:wfwsetup.dll
    2:commdlg.dll
    2:commctrl.dll
    1:ncdw.dll
    2:sconfig.dll

[windows.system.386]
    2:cpwin386.cpl

[386max]
    2:386max.vxd
    2:windows.lod

[bluemax]
    2:bluemax.vxd
    2:windows.lod

[shell]
    progman.exe,  "Gerenciador de Programas"

; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
: !!! The description strings should not be changed.
; !!! Changing description strings can result in old drivers not being
; !!! upgraded since Setup uses the description string to determine what
; !!! driver is installed and whether a new, upgraded driver is provided
; !!! with this version of Windows.
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;

[display]
;profile = driver,         Description of driver,                                resolution,    286 grabber,    logo code,       VDD,            386grabber,   ega.sys,   logo data,    optional work section
;
8514     = 2:8514.drv,     "8514/a",                                             "100,120,120", , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514
8514s    = 2:8514.drv,     "8514/a (fontes pequenas)",                           "100,96,96",   , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514s
vga      = 2:vga.drv,      "VGA",                                                "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
vga30    = 2:vga.drv,      "VGA (versao 3.0)",                                   "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
svga     = 2:supervga.drv, "Super VGA (800x600, 16 cores)",                      "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
8vga480  = 2:svga256.drv,  "Super VGA (640x480, 256 cores) ",                    "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga640
8vga600l = 2:svga256.drv,  "Super VGA (800x600, 256 cores, fontes grandes)",     "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800l
8vga600s = 2:svga256.drv,  "Super VGA (800x600, 256 cores, fontes pequenas)",        "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800s
8vga768l = 2:svga256.drv,  "Super VGA (1024x768, 256 cores, fontes grandes)",    "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768l
8vga768s = 2:svga256.drv,  "Super VGA (1024x768, 256 cores, fontes pequenas)",       "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768s
v7vga    = 2:v7vga.drv,    "Video 7 (512K, 640x480 256 cores)",                  "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7b
v7c      = 2:v7vga.drv,    "Video 7 (512K, 720x512 256 cores)",                  "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7c
v7d      = 2:v7vga.drv,    "Video 7 (1Mb,  800x600 256 cores)",                  "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7d
v7e      = 2:v7vga.drv,    "Video 7 (1Mb, 1024x768 256 cores, fontes grandes)",    "100,120,120", , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7e
v7f      = 2:v7vga.drv,    "Video 7 (1Mb, 1024x768 256 cores, font. pequenas)",     "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7f
xga16    = 2:vga.drv,      "XGA (640x480, 16 cores)",                            "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
xgasm    = 1:xga.drv,      "XGA (fontes pequenas)",                              "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgasm
xgalg    = 1:xga.drv,      "XGA (fontes grandes)",                               "100,120,120", , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalg
xgalo    = 1:xga.drv,      "XGA (640x480, 256 cores)",                           "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalo

[display.old]
; This section contains the names of all the videos that
; setup can detect. If the entry is not in the [display]
; section above, setup presents a warning to the user.
8514     = "8514/a"
cga      = "CGA"
egahibw  = "EGA preto e branco (somente 286)"
egahires = "EGA"
egamono  = "EGA monocromático (somente 286)"
hercules = "Hercules monocromático "
hpmulti  = "Vídeo HP CGA"
mcga     = "IBM MCGA (somente 286)"
olibw    = "Olivetti/AT&T monocromático ou vídeo PVC"
plasma   = "Vídeo de plasma do Compaq Portable"
tiga1    = "TIGA"
v7vga    = "Vídeo 7"
vga      = "VGA"
vgamono  = "VGA com vídeo monocromático"
xga16    = "XGA"



;
; Optional sections listed in field 9 of the display secton are intrpreted as follows:
;
; File, Destination, .ini file, Section, LHS, RHS
;
; Where:    x:File      = Optional; file to be copied, may be left null.
;           Destination = 0: for windows root or 0:system for system subdir
;                          where file is to be copied.
;           .ini file   = Optional; .ini file to be modified or created.
;                          Must be included if following parameters specified.
;           Section     = Section of .ini file to be modified.
;           OldLine     = Optional; old line to be removed from the .ini file.
;                          Only one occurence of the specified string is removed.
;           NewLine     = New text line to be written to the .ini file.
;
;[v7vga]
;x:v7vga.vxd, 0:system, system.ini, 386enh, "v7device=", "display=v7vdd.386"

[vgamono]
,,system.ini,386enh,"vgamono=","vgamono=TRUE"

[8514]
,,system.ini,8514.DRV,"dpi=","dpi=120"

[8514s]
,,system.ini,8514.DRV,"dpi=","dpi=96"

[v7b]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=640x480"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7c]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=720x512"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7d]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=800x600"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7e]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=large"

[v7f]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[xgasm]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[xgalg]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=2"

[xgalo]
,,system.ini,XGA_Display,"XGA_Resolution=","XGA_Resolution=1"
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[svga640] 
,,system.ini,svga256.drv,"resolution=","resolution=1"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi="
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800s]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800l]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768s] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768l] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"


; copy these fonts depending on the 386 grabber being used
[VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[VGA30.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[V7VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[vgadib.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON


[keyboard.drivers]
kbd   = 2:keyboard.drv
kbdhp = 2:kbdhp.drv

[keyboard.types]
t3s0alat  = "Todos os tipos de teclado AT (84 - 86 teclas)"   ,nodll
t1s2at&t  = "Teclado AT&T '301'"                              ,nodll
t1s4at&t  = "Teclado AT&T '302'"                              ,nodll
t4s0enha  = "Teclado enhanced 101 ou 102 teclas, EUA ou nao"  ,nodll
t3s0hp1   = "Teclado Hewlett-Packard Vectra (DIN)"            ,nodll
t4s40oliv = "Teclado Olivetti 101/102 A"                      ,nodll
t1s0oliv  = "Teclado Olivetti de 83 teclas"                   ,nodll
t3s10oliv = "Teclado Olivetti de 86 teclas"                   ,nodll
t2s1oliv  = "Teclado Olivetti M24 de 102 teclas"              ,usadll
t1s42oliv = "Teclado PC-XT de 83 teclas"                      ,nodll
t1s0pcxt  = "Tipo de teclado - PC/XT (84 teclas)"             ,nodll

[keyboard.tables]
gerdll = 2:kbdgr.dll , "Alemao"
beldll = 2:kbdbe.dll , "Belga"
bradll = 2:kbdbr.dll , "Brasileiro (ABNT)"
usxdll = 2:kbdusx.dll, "Brasileiro (Internacional)"
bridll = 2:kbduk.dll , "Britânico"
cafdll = 2:kbdfc.dll , "Canadense multilingüe"
dandll = 2:kbdda.dll , "Dinamarquês"
spadll = 2:kbdsp.dll , "Espanhol"
nodll  =             , "EUA"
usadll = 2:kbdus.dll , "EUA"
usddll = 2:kbddv.dll , "EUA-Dvorak"
findll = 2:kbdfi.dll , "Finlandês"
fredll = 2:kbdfr.dll , "Francês"
candll = 2:kbdca.dll , "Franco-Canadense"
dutdll = 2:kbdne.dll , "Holandês"
icedll = 2:kbdic.dll , "Islandês"
itadll = 2:kbdit.dll , "Italiano"
latdll = 2:kbdla.dll , "Latino Americano"
nordll = 2:kbdno.dll , "Norueguês"
pordll = 2:kbdpo.dll , "Português"
swedll = 2:kbdsw.dll , "Sueco"
swgdll = 2:kbdsg.dll , "Suíço-Alemao"
swfdll = 2:kbdsf.dll , "Suíço-Francês"

[codepages]
;       Xlat Table     OEM Font      WOA Font     Description
863 = 2:xlat863.bin, 2:vga863.fon, 2:dosapp.fon, "Franco-Canadense (863)"
861 = 2:xlat861.bin, 2:vga861.fon, 2:app850.fon, "Islândia (861)"
865 = 1:xlat865.bin, 2:vga865.fon, 2:app850.fon, "Nórdico (865)"
850 = 2:xlat850.bin, 2:vga850.fon, 2:app850.fon, "Multi-Língual (850)"
860 = 2:xlat860.bin, 2:vga860.fon, 2:dosapp.fon, "Português (860)"
437 =              ,             , 2:dosapp.fon, "Inglês (437)"

[pointing.device]
;
; Note: the VMD field may contain multiple VXD's in the form "x:*vmd,2:1vmd.386".
;       Please note, however, that if multiple VXD's are specified in the VMD field
;       they must be surrounded by double quotes (").
;
;profile =  mouse driver,   Mouse description,                     VMD,     Optional work section
;
lmouse   = 2:lmouse.drv,  "Logitech",                              2:lvmd.386, lmouse
ps2mouse = 2:mouse.drv,   "Microsoft ou IBM PS/2",                 x:*vmd
genius1  = 2:mscmouse.drv,"Mouse serial Genius em COM1"          , 2:mscvmd.386
genius2  = 2:msc3bc2.drv, "Mouse serial Genius em COM2"          , 2:mscvmd.386
msmouse2 = 2:mscmouse.drv,"Mouse Systems serial ou bus"          , 2:mscvmd.386
msmouse1 = 2:msc3bc2.drv, "Mouse Systems serial em COM2"         , 2:mscvmd.386
nomouse  = 2:nomouse.drv, "Nenhum mouse ou dispositivo apontador", x:*vmd

[lmouse]
2:lmouse.com,0:,,,,

[dos.mouse.drivers]
mouse.sys   = 6:mouse.SYS,     "Controlador de mouse MS Dos .SYS ver 7.XX"
mouse.com   = 6:mouse.com,     "Controlador de mouse MS Dos .COM ver 7.XX"

[dos.drivers]
MSCDEX.EXE  = 6:MSCDEX.EXE,    "Extensoes de CD ROM"

[sysfonts]
2:vgasys.fon,"Fonte System resoluçao VGA (640x480)", "100,96,96"
2:8514sys.fon,"Fonte System resoluçao 8514/a (1024x768)", "100,120,120"

[fixedfonts]
2:vgafix.fon,"Fonte System Fixed resoluçao VGA (640x480)", "100,96,96"
2:8514fix.fon,"Fonte System Fixed resoluçao 8514/a (1024x768)",  "100,120,120"

[oemfonts]
2:vgaoem.fon,"Fonte Terminal resoluçao VGA (640x480) (EUA/Europa)", "100,96,96",1
2:8514oem.fon,"Fonte Terminal resoluçao 8514/a (1024x768) (EUA/Europa)", "100,120,120",1

;   The win.copy section is a list of files or sections to copy to the WINDOWS
;   directoy.
;
;   FORMAT      from,to
;
;   IE
;       1:foo.txt,  0:        copy foo.txt from disk 1 to the windows directory
;       #386,       0:system  copy all files in the 386 SECTION to the
;
;
[win.copy.net.win386]
; copy this section for network setup on 386 machines
   #net,       0:

[win.copy.win386]
; copy this section for full setup on 386 machines
   #net,       0:
   #win.shell, 0:
   #pwin386,   0:system
   #mapi,      0:system
   #win.other, 0:system
   
[net]
   7:CONTROL.SRC,    "os arquivos de usuários Windows"
   7:WINVER
   6:WININIT.EXE,    "Utilitário de inicialização do sistema do Config"

[win.devices]
; These devices will be copied on all machines
   6:HIMEM.SYS,      "Gerenciador de memória estendida (XMS)"
   6:SMARTDRV.EXE,   "Programa de cache de disco"
   7:RAMDRIVE.SYS,   "Programa RAM Drive"
   7:IFSHLP.SYS,     "Gerenciador do sistema de arquivos"

[win.devices.win386]
; These devices will be copied on 386 machines only
   6:HIMEM.SYS,      "Gerenciador de memória estendida (XMS)"
   4:EMM386.EXE,     "Gerenciador de memória expandida (LIM EMS)"
   6:SMARTDRV.EXE,   "Programa de cache de disco"
   7:RAMDRIVE.SYS,   "Programa RAM Drive"
   7:IFSHLP.SYS,     "Gerenciador do sistema de arquivos"

[win.other]
   6:WIN87EM.DLL,    "Componente do sistema do Windows"
   6:SYSEDIT.EXE
   6:NDDEAPI.DLL
   4:OLECLI.DLL
   6:OLESVR.DLL
   6:WSWAP.EXE
   5:MIDIMAP.DRV
   7:MIDIMAP.CFG,,noclobber
   3:SND.CPL,,novermsg
   5:MMSYSTEM.DLL
   7:MMTASK.TSK
   5:TIMER.DRV
   6:MCISEQ.DRV
   6:MCIWAVE.DRV
   6:TOOLHELP.DLL
   3:MAIN.CPL
   6:DRIVERS.CPL
   6:SETUP.REG
   4:CONTROL.INF
   6:APPS.INF
   6:DDEML.DLL
   4:NETWORK.INF
   6:WINNET.INF
   7:LM21DRV.UPD
   4:UNIDRV.DLL
   5:UNIDRV.HLP

[mapi]
   4:AB.DLL,    "Componente do sistema do Mail do Windows"
   5:DEMILAYR.DLL
   3:FRAMEWRK.DLL
   6:MAILMGR.DLL
   5:MAILSPL.EXE
   5:MAPI.DLL
   5:CMC.DLL
   3:MSSFS.DLL
   6:PABNSP.DLL
   7:SENDFILE.DLL
   3:STORE.DLL
   4:VFORMS.DLL

[win.shell]
   4:PROGMAN.EXE,    "Gerenciador de Programas"
   7:TASKMAN.EXE,    "Lista de Tarefas"
   4:WINFILE.EXE,    "Gerenciador de Arquivos"
   5:CLIPBRD.EXE,    "Área de Armazenamento"
   6:CLIPSRV.EXE,    "Servidor da Área de Armazenamento"
   6:CONTROL.EXE,    "Painel de Controle"
   6:PIFEDIT.EXE,    "Editor PIF"
   6:REGEDIT.EXE,    "Banco de Dados de Registro"
   5:PRINTMAN.EXE,   "Gerenciador de Impressão"
   3:MSD.EXE,        "Microsoft Diagnostics"
   7:msd.ini
   3:WRITE.EXE,      "Processador de texto Write"
   5:WRITE.HLP,      "Ajuda-Write"
   5:moricons.dll,   "Ícones"

[pwin386]
   6:WINOA386.MOD,   "Arquivos do modo 386 avançado"
   7:WIN386.PS2
   2:WIN386.EXE
   5:VTDAPI.386
   6:VFAT.386
   7:VCACHE.386
   5:IFSMGR.386
   6:VSHARE.386
   7:VCOMM.386
   7:SERIAL.386
   7:LPT.386
   7:VPMTD.386
   6:IOS.386
   7:VXDLDR.386
   7:RMM.D32

[DelFiles]
;Statically initialize the list of files that will be DELETED during the
;  3.0 to 3.1 up-grade process. Add or remove items from this list at will,
;  (Wildcards accepted in list)
; The first files in the list are deleted from Windows System dir(local setup).
; Nb : Note that DelFiles section always is processed before RenFiles section.
   tmsr?.fon
   helv?.fon
   swapfile.exe
   kernel.exe
   midi.cpl
   _default.pif
   ; old network setup .cpl's
   wrkgrp.cpl
   wfwsetup.cpl
   netsetup.cpl
   ; ras 1.0 stuff
   rasconf.cpl
   ; the following files are being renamed after beta2
   ipx32.386
   vmsipx.386
   nbipx.386
   ; Beta2 Dragon components
   apix.386
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE
; All files in the list AFTER this point will be deleted from Windows dir.
; WARNING: The "..\" is needed, the code depends on it!!!
   ..\setup.inf
   shell.dll
   olecli.dll
   olesvr.dll
   commdlg.dll
   ver.dll
   toolhelp.dll
   *.pcl
   3270.txt
   redes.txt
   impress.txt
   leiame.txt
   sysini?.txt
   winini?.txt
   ; ras 1.0 stuff
   rasadmin.exe
   rasphone.exe
   rasphone.hlp
   rasphone.pif
   rasadmin.hlp
   rasadmin.ico
   rasphone.msg
   rasdial.exe
   rashelp.msg
   rasload.bat
   rashelp.exe
   rasconf.hlp
   rasphone.ico
   modems.inf
   comdev.ini
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE

[RenFiles]
; Similar section but for file renaming to create .bak if needed
   ADLIB.DRV,MSADLIB.DRV
   MSCDEX.EXE,MSCDEX.OLD


; The win.apps, win.games, win.scrs, win.bmps, and win.readme sections are
; all formatted as described below.
;
; X:FileName,      Description,     FileSize,   Profile String
;
; Where profile string is used by setup.exe to "lookup" the item in the
; appropiate progman groups section to determine if and how the item is
; to be added to a Program manager group via DDE. The profile string is
; also used to "lookup" and needed dependent files in the [win.dependents]
; section.
;
[win.apps]
   6:CALC.EXE,     "Calculadora"                               ,  43120, calc
   4:CARDFILE.EXE, "Arquivo de Fichas"                         ,  93184, cardfile
   5:CLOCK.EXE,    "Relógio"                                   ,  16800, clock
   6:NOTEPAD.EXE,  "Bloco de Notas"                            ,  33408, notepad
   4:PBRUSH.EXE,   "Paintbrush"                                , 190750, pbrush
   4:TERMINAL.EXE, "Terminal"                                  , 149360, terminal
   6:CALC.HLP,     "Ajuda-Calculadora"                         ,  18258
   6:CARDFILE.HLP, "Ajuda-Arquivo de Fichas"                   ,  27560
   6:NOTEPAD.HLP,  "Ajuda-Bloco de Notas"                      ,  14791
   5:PBRUSH.HLP,   "Ajuda-Paintbrush"                          ,  41905
   6:RECORDER.EXE, "Gravador"                                  ,  50286, recorder
   6:RECORDER.HLP, "Ajuda-Gravador"                            ,  19094
   6:TERMINAL.HLP, "Ajuda-Terminal"                            ,  39597
   5:PACKAGER.EXE, "Gerenciador de Objetos"                    ,  77600, packager
   6:PACKAGER.HLP, "Ajuda-Gerenciador de Objetos"              ,  22956
   6:CHARMAP.EXE,  "Mapa de Caracteres"                        ,  22016, charmap
   6:CHARMAP.HLP,  "Ajuda-Mapa de Caracteres"                  ,  11248
   3:MPLAYER.EXE,  "Controlador de Mídia"                      ,  33824, mplayer, novermsg
   4:MPLAYER.HLP,  "Ajuda-Controlador de Mídia"                ,  13323
   5:SOUNDREC.EXE, "Gravador de Som"                           ,  51753, soundrec
   6:SOUNDREC.HLP, "Ajuda-Gravador de Som"                     ,  18085
   5:PIFEDIT.HLP,  "Ajuda-Editor PIF"                          ,  37684
   4:PRINTMAN.HLP, "Ajuda-Gerenciador de Impressão"            ,  66068
   4:PROGMAN.HLP,  "Ajuda-Gerenciador de Programas"            ,  32114
   2:CLIPBRD.HLP,  "Ajuda-Área de Armazenamento"               ,  32560
   6:REGEDIT.HLP,  "Ajuda-Banco de Dados de Registro"          ,  23187
   6:REGEDITV.HLP, "Ajuda Avançada-Banco de Dados de Registro" ,  17184
   4:WINFILE.HLP,  "Ajuda-Gerenciador de Arquivos"             ,  89307
   4:WINTUTOR.EXE, "Tutorial do Windows"                       , 183678, wintutor
   6:WINHELP.HLP,  "Utilitário Ajuda"                          ,  27439
   4:GLOSSARY.HLP, "Glossário da Ajuda"                        ,  59367
   6:EXPAND.EXE,   "Utilitário de Expansão de Arquivos"        ,  16475
   7:RASSTART.EXE, "Acesso Remoto"                             ,  13312, rasmac
   3:MSMAIL.EXE,   "Mail"                                      , 642608, msmail
   3:MSMAIL.HLP,   "Ajuda-Mail"                                , 229753
   2:SCHDPLUS.EXE, "Schedule+"                                 , 751472, schdplus
   3:SCHDPLUS.HLP, "Ajuda-Schedule+"                           , 264263
   7:FAXMGR.EXE,   "Microsoft At Work Fax"                     ,  1069072, msfax
   6:MSFAX.HLP,    "Ajuda-Microsoft At Work Fax"               ,  56757
   diskspace=4601218

[win.dependents]
pbrush   = 7:PBRUSH.DLL
recorder = 6:RECORDER.DLL
wintutor = 4:WINTUTOR.DAT
hearts   = #hearts
msmail   = #msmail
schdplus = #sched
msfax    = #faxsys, 0:system, #msfax

[hearts]
   5:CARDS.DLL,,nodelete

[msmail]
   5:SCHEDMSG.DLL, "Controladores do Mail"
   4:WGPOMGR.DLL
   5:IMPEXP.DLL
   4:FAXVIEW.EXE,  "Gerenciador de Impressão de Fax", nodelete
   
[sched]
   6:MSREMIND.EXE, "Controladores do Schedule+"
   4:MSSCHED.DLL
   6:TRNSCHED.DLL
   
[faxsys]
   6:FAXNSP.DLL,    "Controladores do Fax"
   7:FAX.CPL
   6:FAXSTUB.DLL
   7:EFAXDRV.DRV

[msfax]
   6:AWCLASS1.DLL,    "Controladores do Fax"
   6:AWCLASS2.DLL
   7:DLLSCHED.DLL
   7:AWCAS.DLL
   5:EFAXPUMP.DLL
   6:EFAXRUN.DLL
   6:AWFXPROT.DLL
   6:FAXCODEC.DLL
   6:AWFAXIO.DLL
   6:FAXCOVER.DLL,
   4:FAXOPT.DLL,,nodelete
   7:IFKERNEL.DLL
   7:KEYVIEW.EXE,
   6:LINEARIZ.DLL
   6:NETFAX.DLL
   7:SIGVIEW.EXE,
   6:AWT30.DLL
   7:TRNOFF.DLL
   3:MSMAIL.EXE,    "Controladores do Mail para Fax", nodelete
   5:SCHEDMSG.DLL,,nodelete
   4:WGPOMGR.DLL,,nodelete
   5:IMPEXP.DLL,,nodelete
   4:FAXVIEW.EXE,   "Gerenciador de Impressão de Fax", nodelete

[win.games]
   4:SOL.EXE,      "Jogo Paciência"     , 180912, sol
   6:WINMINE.EXE,  "Jogo Campo Minado"  ,  27872, winmine
   6:SOL.HLP,      "Ajuda-Paciência"    ,  15028
   6:WINMINE.HLP,  "Ajuda-Campo Minado" ,  13142
   4:MSHEARTS.EXE, "Jogo Copas"         , 263728, hearts
   6:MSHEARTS.HLP, "Ajuda-Copas"        ,  13951
   diskspace=514633

[win.scrs]
   7:SCRNSAVE.SCR, "Proteção Padrão"         ,   5680
   6:SSMARQUE.SCR, "Proteção Marquee"        ,  17296
   6:SSSTARS.SCR,  "Proteção Stars"          ,  17920
   6:ssflywin.scr, "Proteção Flying Windows" ,  16560
   diskspace=57456

[win.bmps]
   7:BALOES.BMP,   "Bitmap Balões"               ,    630
   7:LOSANGOS.BMP, "Bitmap Losangos"             ,    630
   7:CASTELO.BMP,  "Bitmap Castelo"              ,    778
   7:EGITO.BMP,    "Bitmap Egito"                ,    630
   7:COLMEIA.BMP,  "Bitmap Colméia"              ,    854
   7:PONTOS.BMP,   "Bitmap Pontos"               ,    630
   7:TIJOLO.BMP,   "Bitmap Tijolo"               ,    630
   7:QUADRADO.BMP, "Bitmap Quadrado"             ,    630
   7:MALHA.BMP,    "Bitmap Malha"                ,    598
   6:WINLOGO.BMP,  "Bitmap Logotipo do Windows"  ,  38518
   7:ZIGZAG.BMP,   "Bitmap Zigzag"               ,    630
   7:ding.wav,     "Som Ding"                    ,  11598
   6:repique.wav,  "Som Repique"                 ,  15920
   6:canyon.mid,   "Som Canyon MIDI"             ,  33883
   6:tocando.wav,  "Campainha do telefone"       ,  10026
   7:chamando.wav, "Sinal de chamada telefônica" ,   5212
   diskspace=121797

[win.readme]
   3:leiame.wri,  "Leiame Geral"       ,  94336, readme
   3:redes.wri,   "Leiame Redes"       ,  38656
   3:winini.wri,  "Leiame Win.ini"     ,  23680
   3:sysini.wri,  "Leiame System.ini"  ,  68864
   3:impress.wri, "Leiame Impressoras" ,  51200
   6:mail.wri,     "Leiame Mail"              ,  41600
   diskspace=318336

; The [*.groups] sections maps a group section to the group name used in
; Program Manager.
;
; Section Name = Progman group name, Min/Max switch. ( 1 = Max, nothing = Min).
;
; This section is used for upgrading from 3.X to 3.1.
[new.groups]
group7=Principal,1
group2=Acessórios
group8=Rede
group6=Jogos
group1=Iniciar

; This section is for new install.
[progman.groups]
group3=Principal,1
group4=Acessórios
group8=Rede
group5=Jogos
group1=Iniciar

; Progman DDE control section. This section controls the progman DDE and defines which
; .exe's will be added to which groups. The [progman.groups] sections lists section
; names that each describe the contents of that group.
;
; Description string,  .EXE name, Icon extraction .EXE, Icon extraction index, profile
;
; If the profile field is left NULL, the item will always be added to the group. Otherwise
; the item will only be added if it was installed via the partial install dlg.
;
;
; NOTE: If EXE name is NULL item will be deleted from the group if it exists there.
;

[group3]
"Gerenciador de Arquivos",   WINFILE.EXE
"Painel de Controle",        CONTROL.EXE
"Gerenciador de Impressão",  PRINTMAN.EXE
"Área de Armazenamento",     CLIPBRD.EXE
"Aviso do MS-DOS",           DOSPRMPT.PIF, PROGMAN.EXE, 9
"Config do Windows",         WINSETUP.EXE
"Editor PIF",                PIFEDIT.EXE
"Leia Me"
"Leia Me",                   LEIAME.WRI,,,                       readme
"Área de Transferência"
"Aviso do DOS"
"Tutorial"

[group4]
"Write",                     WRITE.EXE
"Paintbrush",                PBRUSH.EXE,,,                       pbrush
"Terminal",                  TERMINAL.EXE,,,                     terminal
"Bloco de Notas",            NOTEPAD.EXE,,,                      notepad
"Gravador",                  RECORDER.EXE,,,                     recorder
"Arquivo de Fichas",         CARDFILE.EXE,,,                     cardfile
"Calculadora",               CALC.EXE,,,                         calc
"Relógio",                   CLOCK.EXE,,,                        clock
"Gerenciador de Objetos",    PACKAGER.EXE,,,                     packager
"Mapa de Caracteres",        CHARMAP.EXE,,,                      charmap
"Controlador de Mídia",      MPLAYER.EXE,,,                      mplayer
"Gravador de Som",           SOUNDREC.EXE,,,                     soundrec
"PIF Editor"
; Remove old network icons
"Bate-papo"
"Medidor de Eficiência do Sistema"
"Gerenciador da Rede"
"Gerenciador de Mensagens"
"Virtual Disk Status"
"Fast Mail"
"Editor de Lista de Senhas"
"Utilitário de Aviso de Mensagem"
"Gerenciador de Objeto"

[group5]
"Paciência",                 SOL.EXE,,,                          sol
"Campo Minado",              WINMINE.EXE,,,                      winmine
"Copas",                     MSHEARTS.EXE,,,                     hearts
; Remove old icons
"FreeCell"

[group1]
"Dr. Watson"

[group2]
"Gerenciador de Objetos",    PACKAGER.EXE,,,                     packager
"Mapa de Caracteres",        CHARMAP.EXE,,,                      charmap
"Controlador de Mídia",      MPLAYER.EXE,,,                      mplayer
"Gravador de Som",           SOUNDREC.EXE,,,                     soundrec
"Editor PIF"
"Write",                     WRITE.EXE
; Remove old network icons 
"Bate-papo"
"Medidor de Eficiência do Sistema" 
"Gerenciador da Rede"
"Gerenciador de Mensagens"
"Virtual Disk Status"
"Fast Mail"
"Editor de Lista de Senhas"
"Utilitário de Aviso de Mensagem"
"Gerenciador de Objeto"

[group6]
"Paciência",                 SOL.EXE,,,                          sol
"Campo Minado",              WINMINE.EXE,,,                      winmine
"Copas",                     MSHEARTS.EXE,,,                     hearts
; Remove old icons
"FreeCell"

[group7]
"Área de Transferência"
"Área de Armazenamento",     CLIPBRD.EXE
"Config do Windows",         WINSETUP.EXE
"Editor PIF",                PIFEDIT.EXE
"Leia Me"
"Aviso do DOS"
"Aviso do MS-DOS",           DOSPRMPT.PIF, PROGMAN.EXE, 9
"Leia Me",                   LEIAME.WRI,,,                       readme
"Tutorial"

[group8]
"Configurações da Rede",      "WINSETUP.EXE /Z",,, 
"Mail",                      MSMAIL.EXE,,,                       msmail
"Schedule+",                 SCHDPLUS.EXE,,,                     schdplus
"Acesso Remoto",             RASSTART.EXE,,,                     rasmac
; Remove old network icons
"Utilitário de Aviso de Mensagem"

[fonts]
   6:SSERIFE.FON, "MS Sans Serif 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SSERIFF.FON, "MS Sans Serif 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   6:COURE.FON, "Courier 10,12,15 (res. VGA)", "100,96,96"
   6:COURF.FON, "Courier 10,12,15 (res. 8514/a)", "100,120,120"

   6:SERIFE.FON, "MS Serif 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SERIFF.FON, "MS Serif 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   6:SYMBOLE.FON, "Symbol 8,10,12,14,18,24 (res. VGA)", "100,96,96"
   6:SYMBOLF.FON, "Symbol 8,10,12,14,18,24 (res. 8514/a)", "100,120,120"

   6:SMALLE.FON, "Small Fonts (res. VGA)", "100,96,96"
   6:SMALLF.FON, "Small Fonts (res. 8514/a)", "100,120,120"

   7:ROMAN.FON, "Roman (Plotter)",   "CONTINUOUSSCALING"
   7:SCRIPT.FON, "Script (Plotter)", "CONTINUOUSSCALING"
   7:MODERN.FON, "Modern (Plotter)", "CONTINUOUSSCALING"

[ttfonts]
;
;Font Header file, Description string,       Font file,     FontFamily/Flags
;
; Flags:  0000 = Normal weighted font.
;         0100 = Bolded font.
;         1000 = Italic font.
; NOTE: Flags not currently used.
;
; NOTE: The first letter of each word in the font desctiption string needs
;       to be capitalized.
;                                                     
5:ARIAL.FOT,   "Arial (TrueType)",                           5:arial.ttf,   ""
5:ARIALBD.FOT, "Arial Negrito (TrueType)",                   5:arialbd.ttf, "Arial0100"
5:ARIALBI.FOT, "Arial Itálico Negrito (TrueType)",           5:arialbi.ttf, "Arial1100"
5:ARIALI.FOT,  "Arial Itálico (TrueType)",                   5:ariali.ttf,  "Arial1000"
5:COUR.FOT,    "Courier New (TrueType)",                     5:cour.ttf,    ""
5:COURBD.FOT,  "Courier New Negrito (TrueType)",             5:courbd.ttf,  "Courier0100"
5:COURBI.FOT,  "Courier New Itálico Negrito (TrueType)",     5:courbi.ttf,  "Courier1100"
5:COURI.FOT,   "Courier New Itálico (TrueType)",             5:couri.ttf,   "Courier1000"
5:TIMES.FOT,   "Times New Roman (TrueType)",                 5:times.ttf,   ""
5:TIMESBD.FOT, "Times New Roman Negrito (TrueType)",         5:timesbd.ttf, "Times New Roman0100"
5:TIMESBI.FOT, "Times New Roman Itálico Negrito (TrueType)", 5:timesbi.ttf, "Times New Roman1100"
5:TIMESI.FOT,  "Times New Roman Itálico (TrueType)",         5:timesi.ttf,  "Times New Roman1000"
5:SYMBOL.FOT,  "Symbol (TrueType)",                          5:symbol.ttf,  ""
5:WINGDING.FOT,"WingDings (TrueType)",                       5:wingding.ttf,""

; If any of these drivers are found in the config.sys file, Setup removes them.
[compatibility]
icache.sys
ibmcache.sys
cache.sys
cache.exe
mcache.sys
fast512.sys

; Known TSRs and drivers which may result in a hang or crash
; during execution of Setup or Windows.
;
; filename = description string
[incompTSR1]
ep.exe       = "Norton Desktop/Windows Erase Protect TSR"
qmaps.sys    = "Gerenciador de mem¢ria QMAPS"
qcache.exe   = "Utilit rio de cache de disco 386 Max"
cache.exe    = "Utilit rio de cache de disco"
flash.exe    = "Utilit rio de cache de disco Flash"
hyper386.exe = "Utilit rio de cache de disco Hyper"
hyperdkx.exe = "Utilit rio de cache de disco Hyper"
hyper286.exe = "Utilit rio de cache de disco Hyper"
hyperdke.exe = "Utilit rio de cache de disco Hyper"
hyperdkc.exe = "Utilit rio de cache de disco Hyper"
ncache.exe   = "Utilit rio de cache de disco Norton"
ncache2.exe  = "Utilit rios Norton NCache"
speeddrv.exe = "Norton Speed Drive"
pc-kwik.exe  = "Utilit rio de cache de disco PC-Kwik"
pc-cache.com = "Utilit rio de cache de disco PC Tools"
superpck.exe = "Utilit rio de cache de disco Super PC-Kwik"
vdisk.sys    = "Utilit rio de cache de disco IBM RAM"
allemm4.sys  = "All Charge 386"
anarkey.com  = "Anarkey"
vsafe.sys    = "Central Point Anti-Virus"
vsafe.com    = "Central Point Anti-Virus TSR"
vdefend.sys  = "PC Tools VDefend"
vdefend.com  = "PC Tools VDefend"
kbflow.exe   = "KBFlow TSR by Artisoft"
s-ice.exe    = "SoftIce"
desktop.exe  = "PC Tools Desktop TSR"
sk2.exe      = "Sidekick versao 2.0"
sk.com       = "Sidekick versao 1.0"
skplus.exe   = "Utilit rio Sidekick Plus"
print.exe    = "Utilit rio MS-DOS PRINT"
pyro.exe     = "Prote‡ao de tela Pyro!"
xgaaidos.sys = "Controlador de emula‡ao 8514"
asplogin.exe = "ASP Integrity Toolkit"
lsallow.exe  = "Utilit rios Lansight Network TSR"
lansel.exe   = "Utilit rios Lansight Network TSR"
vaccine.exe  = "Programa de vacina anti-v¡rus"
newspace.exe = "Utilit rio de compacta‡ao de disco Newspace"
newres.exe   = "Utilit rio de compacta‡ao de disco Newspace"
tscsi.sys    = "Controlador Trantor T100 SCSI"
pcpanel.exe  = "Lasertools Printer Control Panel"
hpemm386.sys = "Gerenciador de mem¢ria expandida HP"
hpemm486.sys = "Gerenciador de mem¢ria expandida HP"
ramtype.sys  = "Utilit rio Ramtype"
iemm.sys     = "Gerenciador de mem¢ria"
ilim386.sys  = "Emulador de mem¢ria expandida Intel"
cmdedit.com  = "Editor de linha de comando"
hpmm.sys     = "Gerenciador de mem¢ria HP"
ced.exe      = "Editor de linha de comando PCED"
ced.com      = "Editor de linha de comando CED"
umbpro.sys   = "Gerenciador de mem¢ria UMB Pro"
rm386.sys    = "Gerenciador de mem¢ria NetRoom"
eimpcs.sys   = "Suporte IBM PC"
ecyddx.sys   = "Suporte IBM PC"

; Known TSRs and device drivers which can(!) potentially cause problems
; if running during Setup or Windows
;
; filename = description string
[incompTSR2]
ndosedit.com  = "Editor de linha de comando"
doscue.com    = "Editor de linha de comando DOSCUE"
datamon.exe   = "PC Tools Datamon"
subst.exe     = "Utilit rio MS-DOS SUBST"
join.exe      = "Utilit rio MS-DOS JOIN"
viralert.sys  = "Data Physician Plus TSR"
graphics.com  = "Utilit rio MS-DOS GRAPHICS"
le.com        = "Le Menu Menuing Package"
assign.com    = "Utilit rio MS-DOS ASSIGN"
append.com    = "Utilit rio MS-DOS APPEND"
diskmon.exe   = "Norton Disk Monitoring TSR"
dubldisk.sys  = "Utilit rio Double Disk Data Compression"
pa.exe        = "Printer Assist"
speedfxr.com  = "Speedfxr"
pcsxmaem.sys  = "Utilit rio pcsxmaem"
xmaem.sys     = "Utilit rio xmaem"
cubitr.exe    = "Cubit"

[block_devices]
tscsi.sys
tcscsi.sys
atdosxl.sys
dmdrvr.bin
drdrive.sys

[Installable.Drivers]
; key         = filename,       type(s),     description, VxD(s), Default Params
msadlib       = 5:msadlib.drv,  "MIDI",      "Ad Lib", 5:vadlibd.386,
lapc1         = 7:mpu401.drv,   "MIDI",      "Roland LAPC1",,
midimapper    = 5:midimap.drv,  "MidiMapper", "Mapeador de MIDI",,
mpu401        = 7:mpu401.drv,   "MIDI",      "Roland MPU-401",,
sequencer     = 6:mciseq.drv,   "Sequencer", "MIDI Sequencer [MCI]",,
soundblaster  = 5:sndblst.drv,  "Wave,MIDI", "Sound Blaster 1.0 da Creative Labs", 5:vsbd.386,, msadlib
soundblaster2 = 5:sndblst2.drv, "Wave,MIDI", "Sound Blaster 1.5 da Creative Labs", 5:vsbd.386,, msadlib
timer         = 5:timer.drv,    "Timer",     "Timer", 5:vtdapi.386,
thunder       = 5:sndblst2.drv, "Wave", "Placa Media Vision Thunder", 5:vsbd.386,, msadlib
wave          = 6:mciwave.drv,  "WaveAudio", "Som [MCI]",, "4"
cdaudio       = 6:mcicda.drv,   "CDAudio",   "CD Áudio [MCI]",,

; This section translates Windows 3.0 OEMSETUP.INF entries to their 3.1
; equivalents. The disk names should be the first entries in the list.

[translate]
WinDiskName=26,"Disco do Microsoft Windows 3.1"
WinDiskName=14,"Windows Disco "
*vddvga=2:vddvga30.386
vgalogo.lgo=2:vgalogo.lgo
vgalogo.rle=2:vgalogo.rle
rgdi.lgo=2:vgalogo.lgo
rgdi.rle=2:vgalogo.rle
vga.gr3=2:vga30.3gr
v7vga.gr3=2:v7vga.3gr
cga40woa.fon=2:cga40woa.fon
cga40850.fon=2:cga40850.fon
cga80woa.fon=2:cga80woa.fon
cga80850.fon=2:cga80850.fon
ega40woa.fon=2:ega40woa.fon
ega40850.fon=2:ega40850.fon
ega80woa.fon=2:ega80woa.fon
ega80850.fon=2:ega80850.fon
vgasys.fon=2:vgasys.fon
vgafix.fon=2:vgafix.fon
vgaoem.fon=2:vgaoem.fon
8514sys.fon=2:8514sys.fon
8514fix.fon=2:8514fix.fon
8514oem.fon=2:8514oem.fon
helve.fon=6:sserife.fon
helvf.fon=6:sseriff.fon
coure.fon=6:coure.fon
courf.fon=6:courf.fon
tmsre.fon=6:serife.fon
tmsrf.fon=6:seriff.fon
symbole.fon=6:symbole.fon
symbolf.fon=6:symbolf.fon
roman.fon=7:roman.fon
script.fon=7:script.fon
modern.fon=7:modern.fon
kbdbe.dll=2:kbdbe.dll
kbduk.dll=2:kbduk.dll
kbdda.dll=2:kbdda.dll
kbdne.dll=2:kbdne.dll
kbdfi.dll=2:kbdfi.dll
kbdfr.dll=2:kbdfr.dll
kbdca.dll=2:kbdca.dll
kbdgr.dll=2:kbdgr.dll
kbdic.dll=2:kbdic.dll
kbdit.dll=2:kbdit.dll
kbdla.dll=2:kbdla.dll
kbdno.dll=2:kbdno.dll
kbdpo.dll=2:kbdpo.dll
kbdsp.dll=2:kbdsp.dll
kbdsw.dll=2:kbdsw.dll
kbdsf.dll=2:kbdsf.dll
kbdsg.dll=2:kbdsg.dll
kbdus.dll=2:kbdus.dll
kbddv.dll=2:kbddv.dll
kbdusx.dll=2:kbdusx.dll
xlat863.bin=2:xlat863.bin
xlat861.bin=2:xlat861.bin
xlat865.bin=1:xlat865.bin
xlat850.bin=2:xlat850.bin
xlat860.bin=2:xlat860.bin
vga863.fon=2:vga863.fon
vga861.fon=2:vga861.fon
vga865.fon=2:vga865.fon
vga850.fon=2:vga850.fon
vga860.fon=2:vga860.fon
win.cnf=1:win.cnf

; Used to update files that already exist on the disk
;
[Update.Files]
0:system,5:sndblst.drv
0:system,5:sndblst2.drv
0:system,7:mpu401.drv
0:system,5:msadlib.drv
0:system,5:vtdapi.386
0:system,5:vsbd.386
0:system,5:vadlibd.386
0:system,6:mcicda.drv
0:system,6:cpqgr3.exe
0:system,6:cpqvga.gr3
0:system,6:pscript.drv

; Used to update dependents of files in the [Update.Files] section.
;
[Update.Dependents]
msadlib.drv = 5:vadlibd.386
sndblst.drv = 5:vsbd.386
sndblst2.drv = 5:vsbd.386

; This section is processed by both the DOS and WINDOWS portions of setup
; for temporarily renaming profile strings during setup. THE RENAME
; OPERATION WILL ONLY TAKE PLACE IF THE ORIGINAL PROFILE STRING EXISTS AND HAS
; A RIGHT HAND SIDE STRING.
;
; .ini file,  section name, temporary profile name, Original profile name.
;
[ini.upd.patches]
  system.ini, Boot,    "olddrivers"    ,"drivers"
  win.ini   , Desktop, "oldwallpaper"  ,"wallpaper"
  system.ini, Boot,    "oldtaskman"    ,"taskman.exe"
  system.ini, Boot,    "wfwshell"      ,"shell"

[setupdisplay]
mach32.drv=2:vga.drv
cirrus.drv=2:svga256.drv
wd.drv=2:svga256.drv
framebuf.drv=2:svga256.drv
tseng.drv=2:svga256.drv
linear8.drv=2:vga.drv
cpqavga.drv=2:vga.drv
ht256sf.drv=2:vga.drv
orchidf.drv=2:vga.drv
s3.drv=2:vga.drv
s3?.drv=2:vga.drv
s3??.drv=2:vga.drv
s3???.drv=2:vga.drv
s3????.drv=2:vga.drv
s3?????.drv=2:vga.drv
s3??????.drv=2:vga.drv
viper_??.drv=2:vga.drv
mach-??.drv=2:vga.drv
m32-??.drv=2:vga.drv

[setupdisplay.fon]
fonts.fon=2:vgasys.fon
fixedfon.fon=2:vgafix.fon
oemfonts.fon=2:vgaoem.fon

; Used by the windows half to shrink the memory needed to hold this pig.
;
[blowaway]
   this line needed

[ini.upd.31]
;
; WARNING: This section only works on win.ini or system.ini !!
;
; .ini file,  section,  old line to be replaced,  new line,  rename operater.
;
; If the "old line to be replaced" field is empty, setup will assume that
; the new line is to be added. The rename operater tells setup to retain the RHS
; of the profile. This is used as a renaming mechanism during upgrades.
; Nb : Simple string substitution is implemented :
;     ?P means any valid MS-DOS path
;
  system.ini, Boot,                               ,   "taskman.exe="
  system.ini, mci,     "waveaudio="               ,   "WaveAudio=mciwave.drv"
  system.ini, mci,     "sequencer="               ,   "Sequencer=mciseq.drv"
  system.ini, mci,     "cdaudio="                 ,   "CDAudio=mcicda.drv"
  system.ini, drivers,                            ,   "timer=timer.drv"
  system.ini, drivers,         "midimapper="      ,   "midimapper=midimap.drv"
  system.ini, drivers, "midi=adlib.drv"           ,   "midi=msadlib.drv"          ,rename
  system.ini, drivers, "midi1=adlib.drv"          ,   "midi1=msadlib.drv"         ,rename
  system.ini, drivers, "midi2=adlib.drv"          ,   "midi2=msadlib.drv"         ,rename
  system.ini, drivers, "midi3=adlib.drv"          ,   "midi3=msadlib.drv"         ,rename
  system.ini, drivers, "midi4=adlib.drv"          ,   "midi4=msadlib.drv"         ,rename
  system.ini, 386Enh,       "keyboard=?Pbpvkd.386",
  system.ini, 386Enh,          "keyboard="        ,   "keyboard=*vkd"             ,noclobber
  system.ini, 386Enh,       "device=vpicda.386"   ,   "device=*vpicd"
  system.ini, 386Enh,       "device=vpicd.386"    ,   "device=*vpicd"
  system.ini, 386Enh,                             ,   "device=ifsmgr.386"
  system.ini, 386Enh,                             ,   "device=vcache.386"
  system.ini, vcache,       "minfilecache="       ,   "minfilecache=512", noclobber
  system.ini, 386Enh,       "device=?Pvshare.386" ,   "device=vshare.386"
  system.ini, 386Enh,          "device=*vhd"      ,   "device=*BLOCKDEV", rename
  system.ini, 386Enh,          "device=apix.386"
  system.ini, 386Enh,          "device=*vpd"      ,
  system.ini, 386Enh,          "device=vpd.386"   ,   
  system.ini, 386Enh,          "device=vdmad.386" ,   "device=*vdmad"
  system.ini, 386Enh,          "device=vdmadx.386",   "device=*vdmad"
  system.ini, 386Enh,          "device=vcd.386"   ,   "device=*vcd", rename
  system.ini, 386Enh,       "device=vndis2d.386"  ,   
  system.ini, 386Enh,                             ,   "device=*pagefile"
  system.ini, 386Enh,       "device=?Pvtdapi.386" ,   "device=vtdapi.386"
  system.ini, 386Enh,                             ,   "device=vcomm.386"
  system.ini, 386Enh,       "device=ns8250.386"   ,   "device=serial.386"
  system.ini, 386Enh,                             ,   "device=serial.386"
  system.ini, 386Enh,       "device=comlpt.386"   ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=vpmtd.386"
  system.ini, NonWindowsApp,"localtsrs="          ,   "localtsrs=dosedit,ced"  ,noclobber
  system.ini, 386Enh,       "COM3Irq="            ,   "COM3Irq=4", noclobber
  system.ini, 386Enh,       "COM3Base="           ,   "COM3Base=03E8", noclobber
  system.ini, 386Enh,       "COM4Irq="            ,   "COM4Irq=3", noclobber
  system.ini, 386Enh,       "COM4Base="           ,   "COM4Base=02E8", noclobber
  win.ini   , Sounds,  "SystemDefault="           ,   "SystemDefault=ding.wav, Aviso sonoro padrão"      ,noclobber
  win.ini   , Sounds,  "SystemExclamation="       ,   "SystemExclamation=ding.wav, Exclamação"  ,noclobber
  win.ini   , Sounds,  "SystemStart="             ,   "SystemStart=repique.wav, Início do Windows"       ,noclobber
  win.ini   , Sounds,  "SystemExit="              ,   "SystemExit=repique.wav, Saída do Windows"       ,noclobber
  win.ini   , Sounds,  "SystemHand="              ,   "SystemHand=ding.wav, Parada crítica"       ,noclobber
  win.ini   , Sounds,  "SystemQuestion="          ,   "SystemQuestion=ding.wav, Questão"        ,noclobber
  win.ini   , Sounds,  "SystemAsterisk="          ,   "SystemAsterisk=ding.wav, Asterisco"        ,noclobber
  win.ini   , "mci extensions",                   ,   "wav=waveaudio"
  win.ini   , "mci extensions",                   ,   "mid=sequencer"
  win.ini   , "mci extensions",                   ,   "rmi=sequencer"
  win.ini   , FontSubstitutes,                    ,   "Helv=MS Sans Serif"
  win.ini   , FontSubstitutes,                    ,   "Tms Rmn=MS Serif"
  win.ini   , FontSubstitutes, "Courier=Courier New" ,
  win.ini   , FontSubstitutes,                    ,   "Times=Times New Roman"
  win.ini   , FontSubstitutes,                    ,   "Helvetica=Arial"
  ;
  ; Remove these Win 3.0 font entries from win.ini because they have either
  ; been replaced or removed for Win 3.1
  ;
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. CGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. EGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. VGA)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (res. 8514/a)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. CGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. EGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. VGA)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (res. 8514/a)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "TrueType" rather than "Scalable"
  ;
  win.ini, Fonts, "Arial (Scalable)="
  win.ini, Fonts, "Arial Negrito (Scalable)="
  win.ini, Fonts, "Arial Negrito Itálico (Scalable)="
  win.ini, Fonts, "Arial Itálico (Scalable)="
  win.ini, Fonts, "Courier (Scalable)="
  win.ini, Fonts, "Courier Negrito (Scalable)="
  win.ini, Fonts, "Courier Itálico (Scalable)="
  win.ini, Fonts, "Courier Negrito Itálico (Scalable)="
  win.ini, Fonts, "Courier (TrueType)"
  win.ini, Fonts, "Courier Negrito (TrueType)"
  win.ini, Fonts, "Courier Negrito Itálico (TrueType)"
  win.ini, Fonts, "Courier Itálico (TrueType)"
  win.ini, Fonts, "Times New Roman (Scalable)="
  win.ini, Fonts, "Times New Roman Negrito (Scalable)="
  win.ini, Fonts, "Times New Roman Negrito Itálico (Scalable)="
  win.ini, Fonts, "Times New Roman Itálico (Scalable)="
  win.ini, Fonts, "Symbol PS (Scalable)="
  win.ini, Fonts, "Symbol (Scalable)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "Plotter" rather than "All res" Also, 8 point was
  ; added to the EGA res courier so we remove the old "Courier 10,12,15" font.
  ;
  win.ini, Fonts, "Roman (todas as res.)="
  win.ini, Fonts, "Script (todas as res.)="
  win.ini, Fonts, "Modern (todas as res.)="
  win.ini, Fonts, "Courier 10,12,15 (res. EGA)="
  ;
  ; The following lines will cause the MS-DOS half of setup to effectivly
  ; rename the [Fonts] section in win.ini. Setup does this by adding the
  ; [wt4gpi8s56bz] string to the [Fonts] section and then deleting the
  ; [Fonts] section string. Later, in the windows half of setup, it will
  ; rename [wt4gpi8s56bz] back to [Fonts]. Do not change these names!
  ;
  win.ini, Fonts,              , "[wt4gpi8s56bz]"
  win.ini, Fonts,   "[Fonts]"  ,

  ; The following line makes USER skip persistent net connections
  ; USER immediately deletes the entry so it is a onetime thing.
  win.ini, windows,, "SetupWin=1"

  ; The following lines fix problems with APPS
  win.ini, Compatibility,"NOTSHELL=", "NOTSHELL=0x0001"
  win.ini, Compatibility,"WPWINFIL=", "WPWINFIL=0x0006"
  win.ini, Compatibility,"CCMAIL=", "CCMAIL=0x0008"
  win.ini, Compatibility,"AMIPRO=", "AMIPRO=0x0010"
  win.ini, Compatibility,"REM=", "REM=0x8022"
  win.ini, Compatibility,"PIXIE=", "PIXIE=0x0040"
  win.ini, Compatibility,"CP=", "CP=0x0040"
  win.ini, Compatibility,"JW=", "JW=0x42080"
  win.ini, Compatibility,"TME=", "TME=0x0100"
  win.ini, Compatibility,"VB=", "VB=0x0200"
  win.ini, Compatibility,"WIN2WRS=", "WIN2WRS=0x1210"
  win.ini, Compatibility,"PACKRAT=", "PACKRAT=0x0800"
  win.ini, Compatibility,"VISION=", "VISION=0x0040"
  win.ini, Compatibility,"MCOURIER=", "MCOURIER=0x0800"
  win.ini, Compatibility,"_BNOTES=", "_BNOTES=0x24000"
  win.ini, Compatibility,"MILESV3=", "MILESV3=0x1000"
  win.ini, Compatibility,"PM4=", "PM4=0x2000"
  win.ini, Compatibility,"DESIGNER=", "DESIGNER=0x2000"
  win.ini, Compatibility,"PLANNER=", "PLANNER=0x2000"
  win.ini, Compatibility,"DRAW=", "DRAW=0x2000"
  win.ini, Compatibility,"WINSIM=", "WINSIM=0x2000"
  win.ini, Compatibility,"CHARISMA=", "CHARISMA=0x2000"
  win.ini, Compatibility,"PR2=", "PR2=0x2000"
  win.ini, Compatibility,"PLUS=", "PLUS=0x1000"
  win.ini, Compatibility,"ED=", "ED=0x00010000"
  win.ini, Compatibility,"PP=",
  win.ini, Compatibility,"APORIA=", "APORIA=0x0100"
  win.ini, Compatibility,"EXCEL=", "EXCEL=0x1000"
  win.ini, Compatibility,"GUIDE=", "GUIDE=0x1000"
  win.ini, Compatibility,"NETSET2=", "NETSET2=0x0100"
  win.ini, Compatibility,"W4GL=", "W4GL=0x4000"
  win.ini, Compatibility,"W4GLR=","W4GLR=0x4000"
  win.ini, Compatibility,"TURBOTAX=","TURBOTAX=0x00080000"
  win.ini   , Sounds,  "RingIn="                  ,   "RingIn=tocando.wav,Campainha do telefone"     ,noclobber
  win.ini   , Sounds,  "RingOut="                 ,   "RingOut=chamando.wav,Sinal de chamada telefônica"   ,noclobber
  win.ini   , Network, "DefaultDialogs="

 ; defaults to put up net warning messages
  win.ini, windows, "NetMessage=", "NetMessage=Yes"
  win.ini, windows, "NetWarn=",    "NetWarn=1"

  ; remove beta2 lines
  win.ini, PrinterPorts,        "Microsoft Mail Local Fax="
  win.ini, devices,             "Microsoft Mail Local Fax="

[system]
; The various SYSTEM.DRV, SOUND.DRV, COMM.DRV
;
; These   are the   drivers   which may vary from system to system,
; but are selected only   by the [machine] menu -- they do not have
; special menus   for their selection.
system   =    2:system.drv
sound    =    2:mmsound.drv
comm     =    2:comm.drv
hpsystem =    2:hpsystem.drv

[machine]
; This section defines default machine selections.  The   system
; description from each   entry will appear in the initial machine
; selection menu of Setup.
;
; An * means that setup will use the device specified here and override
; the detected device, this applies to keyboards, mice, and displays.
;
; Each entry contains a   descriptive line for the system-selection menu,
; followed by the filenames of the drivers in fixed order.
;
;      Field      1         2           3        4         5          6         7          8         9             10     11
; prof_str      = Desc Str, System drv, kbd drv, kbd type, mouse drv, disp drv, sound drv, comm drv, himem switch, ebios, cookies
;
ibm_compatible  = "Sistema MS-DOS",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
ast_386_486     = "AST Premium 386/25 e 386/33 (CUPID)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ast_cookz
at_and_t        = "AT&T PC",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
everex_386_25   = "Everex Step 386/25 (ou compatível)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,everex_cookz
hewlett_packard = "Hewlett-Packard: todas as máquinas",hpsystem,kbdhp,t4s0enha,nomouse,vga,sound,comm,,hpebios,
ibm_ps2_70p     = "IBM PS/2 Modelo P70",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
ibm_ps2_l40sx   = "IBM PS/2 Modelo L40sx",system,kbd,!t4s0enha,nomouse,vga,sound,comm,,ebios,ibml40_cookz
ncr_386sx       = "NCR: todas as máquinas baseadas no 80386 e 80486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ncr386sx_cookz
nec_pm_sx+      = "NEC PowerMate SX Plus",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,nec_pm_cookz
nec_prospeed    = "NEC ProSpeed 386",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
toshiba_1600    = "Toshiba 1600",system,kbd,t4s0enha,nomouse,vga,sound,comm,"TOSHIBA",ebios,
toshiba_5200    = "Toshiba 5200",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,t5200_cookz
zenith_386      = "Zenith Data Systems: máquinas baseadas no 386/486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,zen386_cookz
att_nsx_20      = "AT&T NSX 20 : Safari notebook",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios
apm             = "Sistema MS-DOS com APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_cookz
apm_sl          = "Sistema baseado no Intel 386SL com APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_sl_cookz

;
; Cookies as specified in machine section
;
; ini file, section, cookie, needed file
;
; specialdriver,,,file will add an installable driver to [boot]drivers=
;

[apm_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp

[apm_sl_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp
system.ini,power.drv,"OptionsDLL=sl.dll",2:sl.dll
,,,2:sl.hlp

[ast_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[everex_cookz]
system.ini,386enh,"8042ReadCmd=A2,1,F",
system.ini,386enh,"8042ReadCmd=A3,1,F",
system.ini,386enh,"8042WriteCmd=B3,8,F",

[ibml40_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"DMAbuffersize=64"


[ncr386sx_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"emmexclude=C600-C7FF",

[nec_pm_cookz]
system.ini,386enh,"VirtualHDirq=NO",

[t5200_cookz]
system.ini,386enh,"emmexclude=C000-C7FF",

[zen386_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[special_adapter]
eitherlink  = DMAbuffersize,32          ; Needed if EitherLink MC is detected.

[ebios]
ebios       = x:*ebios               ; Required for most 386 machines.
hpebios     = 2:hpebios.386,x:*ebios ; Required for HP 386 machines.

;
; Language DLL must be installed for non US installation.
;
; profile = language DLL, DLL description, language ID (ilanguage)
;
[language]
deu = 2:langger.dll, "Alemao"                 ,1031
dan = 2:langsca.dll, "Dinamarquês"            ,1030
esp = 2:langspa.dll, "Espanhol"               ,1034
esn = 2:langeng.dll, "Espanhol (Moderno)"     ,3082
fin = 2:langsca.dll, "Finlandês"              ,1035
fra = 2:langfrn.dll, "Francês"                ,1036
frc = 2:langeng.dll, "Francês (Canadá)"       ,3084
nld = 2:langdut.dll, "Holandês"               ,1043
enu =              , "Inglês (EUA)"           ,1033
eng = 2:langeng.dll, "Inglês (Internacional)" ,2057
isl = 2:langsca.dll, "Islandês"               ,1039
ita = 2:langeng.dll, "Italiano"               ,1040
nor = 2:langsca.dll, "Norueguês"              ,1044
ptg = 2:langeng.dll, "Português"              ,2070
sve = 2:langsca.dll, "Sueco"                  ,1053

; files included on disk but not referenced in anywhere in setup.inf
[keepers]
    1:config.exe    ; dossetup program
    1:setup.inf     ; setup information file
    1:xmsmmgr.exe   ; xms manager
    1:setup.shh     ; automatic setup template file
    6:prtupd.inf    ; Printer driver update file
    9:admincfg.exe  ; Network Admin Utility 
    9:pss.inf       ; PSS Support Protocol File

; List of 3rd party drivers that replace *wdctrl
; Setup will not add *wdctrl if one of these is present
[*wdctrl]
    cpqwdctl.386    ; compaq wd controller
    ultraisa.386    ; ultra store wd controller
    fdscsi.386      ; future domain scsi
    hc_win.386      ; quantum hardcard
    cam_win.386     ; quantum passport scsi
    scsi_win.386    ; quantum passport scsi

; List of 3rd party drivers that replace *int13
; Setup will not add *int13 if one of these is present
[*int13]
    cpqint13.386    ; used with compaq cpqwdctl.386
    qtmint13.386    ; used with quantum hc_win.386, cam_win.386, and scsi_win.386
    int13.386       ; used with future domain

; List of 3rd party drivers that replace *vpd
; Setup will not add *vpd if one of these is present
[*vpd]
    wpsljvpd.386

