;; Windows for Workgroups 3.11
;; SETUP.INF
;; Copyright (c) Microsoft Corporation, 1991-1993

[setup]
    help = setup.hlp

;   Place any programs here that should be run at the end of setup.
;   These apps will be run in order of their appearance here.
[run]

[dialog]
    caption   = "Installere Windows"
    exit      = "Avslutt Installere Windows"
    title     = "Installerer Windows for Workgroups 3.11 "
    options   = "I tillegg til å installere Windows, kan du: "
    printwait = "Vent mens installasjonsprogrammet konfigurerer skrivere..."
copywait = "Velkommen til Microsoft Windows for Workgroups 3.11!\n\n   - Les 'Bli kjent med Microsoft Windows' i håndboken\n     hvis du ikke har brukt Windows før.\n\n"
copywait5="Du bør registrere Microsoft Windows for Workgroups 3.11-kopien din.\nNår du er registrert, vil Microsoft:\n\n   - Gi beskjed om produktoppdateringer og -lanseringer.\n\n   - Sende deg et informasjonsblad om Windows."

[data]
; Disk space required
; <type of setup>= <Full install space>, <Min install space>

    upd2x386full = 19000000,14000000 ; 19.0 Mb, 14.0 Mb     2.x -> WFW 3.11
    upd30386full = 14500000,10500000 ; 14.5 Mb, 10.5 Mb     3.0 -> WFW 3.11
    upd31386full = 10500000, 7500000 ; 10.5 Mb,  7.5 Mb     3.1 -> WFW 3.11
    updWW386full =  6000000, 3500000 ;  6.0 Mb,  3.5 Mb     WFW 3.1  -> WFW 3.11
    updW1386full =  3000000, 2000000 ;  3.0 Mb,  2.0 Mb     WFW 3.11 -> WFW 3.11
    new386full   = 19000000,14000000 ; 19.0 Mb, 14.0 Mb

    netadmin     = 29000000          ; 29.0 Mb
    netadminupd  = 29000000          ; 29.0 Mb
    upd2x386net  = 1300000           ;  1.3 Mb
    upd30386net  = 1300000           ;  1.3 Mb
    upd31386net  = 1300000           ;  1.3 Mb
    new386net    = 1300000,1300000   ;  1.3 Mb,  1.3 Mb

; Defaults used in setting up and names of a few files
    startup   = WIN.COM
    defdir    = C:\WINDOWS
    defdevdir = C:\NET
    shortname = Windows
    welcome   = "Microsoft Windows for Workgroups 3.11"
    deflang   = nor
    defxlat   = 865
    defkeydll = nordll
    register  = "regedit /s /u setup.reg"
    tutor     = "wintutor.exe "
    winsetup  = "winsetup.exe"
    NetSetup  = FALSE
    MouseDrv  = TRUE
   partial   = FALSE
    Version   = "3.11.050"
    dosmemK   = 410

    ; MS-DOS Driver Versions
    ; These are the version numbers of the drivers that we are shipping
    ; with Microsoft Windows.
    himem.sys.hi     = 0x0310
    himem.sys.lo     = 0x0300
    smartdrv.exe     = 0x0500
    ramdrive.sys     = 0x18F5
    emm386.exe       = 0x0430

; This is data needed by the MS-DOS half of setup so that it can copy the
; proper kernel and start Windows for the GUI portion of setup.
;
; ** MS-DOS documentation says that first byte of command line for 4a call
; ** should be space. ==> in execcmd RHS leave first space as it is now
[winexec]
    execstd   = "dosx.exe "
    execcmd   = " krnl386.exe /b /q:"
    exechimem = "xmsmmgr.exe"
    himemcmd  = ""
    Krnl386   = 1:krnl386.exe
    dosx      = 2:dosx.exe

; Names of the disks Setup can prompt for.
[disks]
    1 =. ,"Microsoft Windows for Workgroups-diskett nr. 1",disk1
    2 =. ,"Microsoft Windows for Workgroups-diskett nr. 2",disk2
    3 =. ,"Microsoft Windows for Workgroups-diskett nr. 3",disk3
    4 =. ,"Microsoft Windows for Workgroups-diskett nr. 4",disk4
    5 =. ,"Microsoft Windows for Workgroups-diskett nr. 5",disk5
    6 =. ,"Microsoft Windows for Workgroups-diskett nr. 6",disk6
    7 =. ,"Microsoft Windows for Workgroups-diskett nr. 7",disk7
    8 =. ,"Microsoft Windows for Workgroups-diskett nr. 8",disk8
    9 =. ,"Microsoft Windows for Workgroups-diskett nr. 9",disk9

[windows]
    2:setup.hlp
    1:install.txt
    2:win.src,    Net
    2:system.src, Net
    1:winsetup.exe
    1:winhelp.exe
    1:control.hlp

[windows.system]
    1:gdi.exe
    1:user.exe
    1:win.cnf
    2:lzexpand.dll
    2:ver.dll
    2:shell.dll
    1:wfwsetup.dll
    1:commdlg.dll
    2:commctrl.dll
    1:ncdw.dll
    2:sconfig.dll

[windows.system.386]
    2:cpwin386.cpl

[386max]
    2:386max.vxd
    2:windows.lod

[bluemax]
    2:bluemax.vxd
    2:windows.lod

[shell]
    progman.exe,  "Programbehandling"

; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
: !!! The description strings should not be changed.
; !!! Changing description strings can result in old drivers not being
; !!! upgraded since Setup uses the description string to determine what
; !!! driver is installed and whether a new, upgraded driver is provided
; !!! with this version of Windows.
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;

[display]
;profile = driver,         Description of driver,                           resolution,286gr,logo code,       VDD,            386grabber,   ega.sys,   logo data,    optional work section
;
8514     = 2:8514.drv,     "8514/a",                                        "100,120,120", , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514
8514s    = 2:8514.drv,     "8514/a (Stor Skrift)",                          "100,96,96",   , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514s
vga      = 2:vga.drv,      "VGA",                                           "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
vga30    = 2:vga.drv,      "VGA (Versjon 3.0)",                             "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
svga     = 2:supervga.drv, "Super VGA (800x600, 16 farger)",                "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
8vga480 = 1:svga256.drv,  "Super VGA (640x480, 256 farger) ",              "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga640
8vga600l = 1:svga256.drv,  "Super VGA (800x600, 256 farger, Stor skrift)",  "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800l
8vga600s = 1:svga256.drv,  "Super VGA (800x600, 256 farger, Liten skrift)",  "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800s
8vga768l = 1:svga256.drv,  "Super VGA (1024x768, 256 farger, Stor skrift)", "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768l
8vga768s = 1:svga256.drv,  "Super VGA (1024x768, 256 farger, Liten skrift)", "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768s
v7vga    = 2:v7vga.drv,    "Video 7 512kB, 640x480 256 farger",           "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7b
v7c      = 2:v7vga.drv,    "Video 7 512kB, 720x512 256 farger",            "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7c
v7d      = 2:v7vga.drv,    "Video 7 1MB,  800x600 256 farger",            "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7d
v7e      = 2:v7vga.drv,    "Video 7 1MB, 1024x768 256 farger (Stor skrift)","100,120,120",, 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7e
v7f      = 2:v7vga.drv,    "Video 7 1MB, 1024x768 256 farger (Liten skrift)","100,96,96",  , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7f
xga16    = 2:vga.drv,      "XGA (640x480, 16 farger)",                 "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
xgasm    = 2:xga.drv,      "XGA (Liten skrift)",                             "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgasm
xgalg    = 2:xga.drv,      "XGA (Stor skrift)",                             "100,120,120", , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalg
xgalo    = 2:xga.drv,      "XGA (640x480, 256 farger)",                     "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalo

[display.old]
; This section contains the names of all the videos that
; setup can detect. If the entry is not in the [display]
; section above, setup presents a warning to the user.
8514     = "8514/a"
cga      = "CGA"
egahibw  = "EGA sort/hvit (kun 286)"
egahires = "EGA"
egamono  = "EGA Monoskjerm (kun 286)"
hercules = "Hercules Monoskjerm"
hpmulti  = "HP CGA-skjerm"
mcga     = "IBM MCGA (kun 286)"
olibw    = "Olivetti/AT&T Monoskjerm eller PVC-skjerm"
plasma   = "Compaq Portable Plasma"
tiga1    = "TIGA"
v7vga    = "Video 7"
vga      = "VGA"
vgamono  = "VGA med Monoskjerm"
xga16    = "XGA"



;
; Optional sections listed in field 9 of the display secton are intrpreted as follows:
;
; File, Destination, .ini file, Section, LHS, RHS
;
; Where:    x:File      = Optional; file to be copied, may be left null.
;           Destination = 0: for windows root or 0:system for system subdir
;                          where file is to be copied.
;           .ini file   = Optional; .ini file to be modified or created.
;                          Must be included if following parameters specified.
;           Section     = Section of .ini file to be modified.
;           OldLine     = Optional; old line to be removed from the .ini file.
;                          Only one occurence of the specified string is removed.
;           NewLine     = New text line to be written to the .ini file.
;
;[v7vga]
;x:v7vga.vxd, 0:system, system.ini, 386enh, "v7device=", "display=v7vdd.386"

[vgamono]
,,system.ini,386enh,"vgamono=","vgamono=TRUE"

[8514]
,,system.ini,8514.DRV,"dpi=","dpi=120"

[8514s]
,,system.ini,8514.DRV,"dpi=","dpi=96"

[v7b]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=640x480"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7c]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=720x512"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7d]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=800x600"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7e]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=large"

[v7f]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[xgasm]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[xgalg]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=2"

[xgalo]
,,system.ini,XGA_Display,"XGA_Resolution=","XGA_Resolution=1"
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[svga640] 
,,system.ini,svga256.drv,"resolution=","resolution=1"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi="
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800s]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800l]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768s] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768l] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"


; copy these fonts depending on the 386 grabber being used
[VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[VGA30.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[V7VGA.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON

[vgadib.3gr]
2:CGA40WOA.FON,2:CGA40850.FON
2:CGA80WOA.FON,2:CGA80850.FON
2:EGA40WOA.FON,2:EGA40850.FON
2:EGA80WOA.FON,2:EGA80850.FON


[keyboard.drivers]
kbd   = 2:keyboard.drv
kbdhp = 2:kbdhp.drv

[keyboard.types]
t3s0alat  = "Alle AT tastatur (84 - 86 taster)"             ,nodll
t1s2at&t  = "AT&T '301' tastatur"                           ,nodll
t1s4at&t  = "AT&T '302' tastatur"                           ,nodll
t4s0enha  = "Avansert 101 eller 102-tasters"                ,nodll
t3s0hp1   = "Hewlett-Packard Vectra tastatur (DIN)"         ,nodll
t4s40oliv = "Olivetti 101/102 A tastatur"                   ,nodll
t1s0oliv  = "Olivetti 83-tasters tastatur"                  ,nodll
t3s10oliv = "Olivetti 86-tasters tastatur"                  ,nodll
t2s1oliv  = "Olivetti M24 102-tasters tastatur"             ,usadll
t1s42oliv = "PC-XT 83-tasters tastatur"                     ,nodll
t1s0pcxt  = "PC/XT -  tastatur (84 taster)"                 ,nodll

[keyboard.tables]
nodll  =             , "Amerikansk"
usadll = 2:kbdus.dll , "Amerikansk"
usddll = 2:kbddv.dll , "Amerikansk-Dvorak"
usxdll = 2:kbdusx.dll, "Amerikansk-Internasjonal"
beldll = 2:kbdbe.dll , "Belgisk"
bradll = 1:kbdbr.dll , "Brasiliansk"
bridll = 2:kbduk.dll , "Britisk"
dandll = 2:kbdda.dll , "Dansk"
findll = 2:kbdfi.dll , "Finsk"
fredll = 2:kbdfr.dll , "Fransk"
candll = 2:kbdca.dll , "Fransk-kanadisk"
dutdll = 2:kbdne.dll , "Hollandsk"
icedll = 2:kbdic.dll , "Islandsk"
itadll = 2:kbdit.dll , "Italiensk"
cafdll = 2:kbdfc.dll , "Kanadisk"
latdll = 2:kbdla.dll , "Latin-amerikansk"
nordll = 2:kbdno.dll , "Norsk"
pordll = 2:kbdpo.dll , "Portugisisk"
spadll = 2:kbdsp.dll , "Spansk"
swedll = 2:kbdsw.dll , "Svensk"
swfdll = 2:kbdsf.dll , "Sveitsisk-fransk"
swgdll = 2:kbdsg.dll , "Sveitsisk-tysk"
gerdll = 2:kbdgr.dll , "Tysk"

[codepages]
;       Xlat Table     OEM Font      WOA Font     Description
863 = 2:xlat863.bin, 2:vga863.fon, 2:dosapp.fon, "Fransk kanadisk (863)"
861 = 2:xlat861.bin, 2:vga861.fon, 2:app850.fon, "Islandsk (861)"
865 = 2:xlat865.bin, 2:vga865.fon, 2:app850.fon, "Nordisk (865)"
850 = 2:xlat850.bin, 2:vga850.fon, 2:app850.fon, "Flerspråklig (850)"
860 = 2:xlat860.bin, 2:vga860.fon, 2:dosapp.fon, "Portugisisk (860)"
437 =              ,             , 2:dosapp.fon, "Engelsk (437)"

[pointing.device]
;
; Note: the VMD field may contain multiple VXD's in the form "x:*vmd,2:1vmd.386".
;       Please note, however, that if multiple VXD's are specified in the VMD field
;       they must be surrounded by double quotes (").
;
;profile =  mouse driver,   Mouse description,                 VMD,     Optional work section
;
lmouse   = 2:lmouse.drv,  "Logitech",                          2:lvmd.386, lmouse
ps2mouse = 2:mouse.drv,   "Microsoft, eller IBM PS/2",            x:*vmd
genius1  = 2:mscmouse.drv,"Genius seriell mus tilkoblet COM1"      , 2:mscvmd.386
genius2  = 2:msc3bc2.drv, "Genius seriell mus tilkoblet COM2"      , 2:mscvmd.386
msmouse2 = 2:mscmouse.drv,"Mouse Systems seriell- eller bussmus", 2:mscvmd.386
msmouse1 = 2:msc3bc2.drv, "Mouse Systems seriell mus tilkoblet COM2",2:mscvmd.386
nomouse  = 2:nomouse.drv, "Ingen mus eller annen pekeredskap", x:*vmd

[lmouse]
1:lmouse.com,0:,,,,

[dos.mouse.drivers]
mouse.sys   = 5:mouse.SYS,     "MS-DOS musdriver .SYS ver 7.XX"
mouse.com   = 5:mouse.com,     "MS-DOS musdriver .COM ver 7.XX"

[dos.drivers]
MSCDEX.EXE = 6:MSCDEX.EXE,    "CD ROM-utvidelser"

[sysfonts]
2:vgasys.fon,"VGA (640x480) oppløsning System-skrift", "100,96,96"
2:8514sys.fon,"8514/a (1024x768) oppløsning System-skrift", "100,120,120"

[fixedfonts]
2:vgafix.fon," Fast System-skrift med VGA-oppløsning (640x480)", "100,96,96"
2:8514fix.fon,"Fast System-skrift med 8514/a-oppløsning (1024x768)",  "100,120,120"

[oemfonts]
2:vgaoem.fon," Terminal-skrift med VGA-oppløsning  (640x480) (USA/Europe)", "100,96,96",1
2:8514oem.fon," Terminal-skrift med 8514/a-oppløsning  (1024x768) (USA/Europe)", "100,120,120",1

;   The win.copy section is a list of files or sections to copy to the WINDOWS
;   directoy.
;
;   FORMAT      from,to
;
;   IE
;       1:foo.txt,  0:        copy foo.txt from disk 1 to the windows directory
;       #386,       0:system  copy all files in the 386 SECTION to the
;
;
[win.copy.net.win386]
; copy this section for network setup on 386 machines
   #net,       0:

[win.copy.win386]
; copy this section for full setup on 386 machines
   #net,       0:
   #win.shell, 0:
   #pwin386,   0:system
   #mapi,      0:system
#win.other, 0:system

[net]
   6:CONTROL.SRC,    "Windows brukerfiler"
   6:WINVER
   6:WININIT.EXE,    "Systeminitieringsprogram"

[win.devices]
; These devices will be copied on all machines
   6:HIMEM.SYS,      "XMS-minnebehandler"
   6:SMARTDRV.EXE,   "Hurtigbufferprogram for disk"
   6:RAMDRIVE.SYS,   "Program for RAM-disk"
   6:IFSHLP.SYS,     "Filsystemhåndterer"

[win.devices.win386]
; These devices will be copied on 386 machines only
   6:HIMEM.SYS,      "XMS-minnebehandler"
   4:EMM386.EXE,     "LIM-tilleggsminnebehandler"
   6:SMARTDRV.EXE,   "Hurtigbufferprogram for disk"
   6:RAMDRIVE.SYS,   "Program for RAM-disk"
   6:IFSHLP.SYS,     "Filsystemhåndterer"

[win.other]   
   6:WIN87EM.DLL,    "Windows systemkomponent"
   6:SYSEDIT.EXE
   6:NDDEAPI.DLL
   4:OLECLI.DLL
   6:OLESVR.DLL
   6:WSWAP.EXE
   5:MIDIMAP.DRV
   6:MIDIMAP.CFG,,noclobber
   6:SND.CPL,,novermsg
   5:MMSYSTEM.DLL
   6:MMTASK.TSK
   5:TIMER.DRV
   6:MCISEQ.DRV
   6:MCIWAVE.DRV
   6:TOOLHELP.DLL
   3:MAIN.CPL
   6:DRIVERS.CPL
   6:SETUP.REG
   4:CONTROL.INF
   6:APPS.INF
   6:DDEML.DLL
   4:NETWORK.INF
   6:WINNET.INF
   6:LM21DRV.UPD
   4:UNIDRV.DLL
   5:UNIDRV.HLP

[mapi]
   4:AB.DLL,    "Windows Postsystemkomponent"
   5:DEMILAYR.DLL
   3:FRAMEWRK.DLL
   5:MAILMGR.DLL
   5:MAILSPL.EXE
   5:MAPI.DLL
   4:CMC.DLL
   3:MSSFS.DLL
   5:PABNSP.DLL
   6:SENDFILE.DLL
   3:STORE.DLL
   4:VFORMS.DLL

[win.shell]
   4:PROGMAN.EXE,    "Programbehandling"
   6:TASKMAN.EXE,    "Oppgaveliste"
   3:WINFILE.EXE,    "Filbehandling"
   4:CLIPBRD.EXE,    "Utklippsbok"
   6:CLIPSRV.EXE,    "Utklippsbokserver"
   6:CONTROL.EXE,    "Kontrollpanel"
   5:PIFEDIT.EXE,    "PIF-redigering"
   6:REGEDIT.EXE,    "Registreringsdatabase"
   3:PRINTMAN.EXE,   "Utskriftsbehandling"
   3:MSD.EXE,        "Microsoft Diagnostikk"
   6:msd.ini
   3:WRITE.EXE,      "Write tekstbehandlingsprogram"
   5:WRITE.HLP,      "Hjelp til Write""
   5:moricons.dll,   "Ikoner"

[pwin386]
   5:WINOA386.MOD,   "Filer for utvidet modus"
   6:WIN386.PS2
   2:WIN386.EXE
   5:VTDAPI.386
   6:VFAT.386
   6:VCACHE.386
   4:IFSMGR.386
   6:VSHARE.386
   6:VCOMM.386
   6:SERIAL.386
   6:LPT.386
   6:VPMTD.386
   6:IOS.386
   6:VXDLDR.386
   6:RMM.D32


[DelFiles]
;Statically initialize the list of files that will be DELETED during the
;  3.0 to 3.1 up-grade process. Add or remove items from this list at will,
;  (Wildcards accepted in list)
; The first files in the list are deleted from Windows system dir(local setup).
; Nb : Note that DelFiles section always is processed before RenFiles section.
   tmsr?.fon
   helv?.fon
   swapfile.exe
   kernel.exe
   midi.cpl
   _default.pif
   ; old network setup .cpl's
   wrkgrp.cpl
   wfwsetup.cpl
   netsetup.cpl
   ; ras 1.0 stuff
   rasconf.cpl
   ; the following files are being renamed after beta2
   ipx32.386
   vmsipx.386
   nbipx.386
   ; Beta2 Dragon components
   apix.386
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE
; All files in the list AFTER this point will be deleted from Windows dir.
; WARNING: The "..\" is needed, the code depends on it!!!
   ..\setup.inf
   shell.dll
   olecli.dll
   olesvr.dll
   commdlg.dll
   ver.dll
   toolhelp.dll
   *.pcl
   3270.txt
   networks.txt
   printers.txt
   readme.txt
   sysini?.txt
   winini?.txt
   ; ras 1.0 stuff
   rasadmin.exe
   rasphone.exe
   rasphone.hlp
   rasphone.pif
   rasadmin.hlp
   rasadmin.ico
   rasphone.msg
   rasdial.exe
   rashelp.msg
   rasload.bat
   rashelp.exe
   rasconf.hlp
   rasphone.ico
   modems.inf
   comdev.ini
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE

[RenFiles]
; Similar section but for file renaming to create .bak if needed
   ADLIB.DRV,MSADLIB.DRV
   MSCDEX.EXE,MSCDEX.OLD


; The win.apps, win.games, win.scrs, win.bmps, and win.readme sections are
; all formatted as described below.
;
; X:FileName,      Description,     FileSize,   Profile String
;
; Where profile string is used by setup.exe to "lookup" the item in the
; appropiate progman groups section to determine if and how the item is
; to be added to a Program manager group via DDE. The profile string is
; also used to "lookup" and needed dependent files in the [win.dependents]
; section.
;
[win.apps]
   5:CALC.EXE,     "Kalkulator"                ,  42976, calc
   4:CARDFILE.EXE, "Kartotek"                  ,  92672, cardfile
   6:CLOCK.EXE,    "Klokke"                     ,  16784, clock
   6:NOTEPAD.EXE,  "Notisblokk"                   ,  32736, notepad
   3:PBRUSH.EXE,   "Paintbrush"                , 189710, pbrush
   4:TERMINAL.EXE, "Terminal"                  , 147904, terminal
   6:CALC.HLP,     "Hjelp til Kalkulator"           ,  18006
   6:CARDFILE.HLP, "Hjelp til Kartotek"             ,  26751
   6:NOTEPAD.HLP,  "Hjelp til Notisblokk"              ,  14496
   5:PBRUSH.HLP,   "Hjelp til Paintbrush"           ,  41134
   6:RECORDER.EXE, "Innspilling"                  ,  49214, recorder
   6:RECORDER.HLP, "Hjelp til Innspilling"             ,  18575
   5:TERMINAL.HLP, "Hjelp til Terminal"             ,  37546
   4:PACKAGER.EXE, "Objektinnpakking"           ,  76912, packager
   6:PACKAGER.HLP, "Hjelp til Objektinnpakking"      ,  22630
   6:CHARMAP.EXE,  "Tegnkart"             ,  22016, charmap
   6:CHARMAP.HLP,  "Hjelp til Tegnkart"        ,  11165
   3:MPLAYER.EXE,  "Mediaavspilling"              ,  33632, mplayer, novermsg
   4:MPLAYER.HLP,  "Hjelp til Mediaavspilling"         ,  12981
   5:SOUNDREC.EXE, "Lydinnspilling"            ,  51417, soundrec
   6:SOUNDREC.HLP, "Hjelp til Lydinnspilling"       ,  18523
   5:PIFEDIT.HLP,  "Hjelp til PIF-redigering"           ,  34909
   4:PRINTMAN.HLP, "Utskriftsbehandling"        ,  60533
   6:PROGMAN.HLP,  "Hjelp til Programbehandling"      ,  32476
   6:CLIPBRD.HLP,  "Hjelp til Utklippsbok"       ,  29702
   6:REGEDIT.HLP,  "Hjelp til Registreringsdatabase"         ,  22564
   6:REGEDITV.HLP, "Avansert hjelp til Registreringsdatabase",  16436
   4:WINFILE.HLP,  "Hjelp til Filbehandling"         ,  79181
   4:WINTUTOR.EXE, "Windows Opplæring"          , 182052, wintutor
   5:WINHELP.HLP,  "Hjelp til Hjelp"         ,  26985
   4:GLOSSARY.HLP, "Hjelp til Ord"             ,  57679
   6:EXPAND.EXE,   "Filkomprimeringsprogram"    ,  16363
   6:RASSTART.EXE, "Ekstern påloggingstjeneste"        ,  13312, rasmac
   3:MSMAIL.EXE,   "MS Mail"                      , 635536, msmail
   4:MSMAIL.HLP,   "Hjelp til MS Mail"             ,  73599
   2:SCHDPLUS.EXE, "Schedule+"                 , 745328, schdplus
   4:SCHDPLUS.HLP, "Hjelp til Schedule+"                , 105043
   6:FAXMGR.EXE,   "Microsoft At Work-faks"     ,  1056688, msfax
   4:MSFAX.HLP,    "Hjelp til Microsoft At Work-faks",  31566
   diskspace=4197732

[win.dependents]
pbrush   = 6:PBRUSH.DLL
recorder = 6:RECORDER.DLL
wintutor = 4:WINTUTOR.DAT
hearts   = #hearts
msmail   = #msmail
schdplus = #sched
msfax    = #faxsys, 0:system, #msfax

[hearts]
   4:CARDS.DLL,,nodelete

[msmail]
   4:SCHEDMSG.DLL, "Drivere til MS Mail"
   4:WGPOMGR.DLL
   5:IMPEXP.DLL
   4:FAXVIEW.EXE,  "Faksbehandling", nodelete

[sched]
   6:MSREMIND.EXE, "Drivere til Schedule+"
   3:MSSCHED.DLL
   6:TRNSCHED.DLL

[faxsys]
   6:FAXNSP.DLL,    "Faksdrivere"
   6:FAX.CPL
   5:FAXSTUB.DLL
   6:EFAXDRV.DRV

[msfax]
   6:AWCLASS1.DLL,    "Faksdrivere"
   6:AWCLASS2.DLL
   6:DLLSCHED.DLL
   6:AWCAS.DLL
   4:EFAXPUMP.DLL
   6:EFAXRUN.DLL
   6:AWFXPROT.DLL
   6:FAXCODEC.DLL
   6:AWFAXIO.DLL
   6:FAXCOVER.DLL,
   4:FAXOPT.DLL,,nodelete
   6:IFKERNEL.DLL
   6:KEYVIEW.EXE,
   6:LINEARIZ.DLL
   6:NETFAX.DLL
   6:SIGVIEW.EXE,
   6:AWT30.DLL
   6:TRNOFF.DLL
   3:MSMAIL.EXE,    "MS Mail-drivere for faks", nodelete
   4:SCHEDMSG.DLL,,nodelete
   4:WGPOMGR.DLL,,nodelete
   5:IMPEXP.DLL,,nodelete
   4:FAXVIEW.EXE,   "Faksbehandling", nodelete

[win.games]
   2:SOL.EXE,      "Kabal"        , 180672, sol
   6:WINMINE.EXE,  "Minesveiper"      ,  27760, winmine
   6:SOL.HLP,      "Hjelp til Kabal"       ,  14222
   6:WINMINE.HLP,  "Hjelp til Minesveiper" ,  12893
   4:MSHEARTS.EXE, "Hjerter"           ,  263728, hearts
   6:MSHEARTS.HLP, "Hjelp til Hjerter"      ,    13266
   diskspace=512541

[win.scrs]
   6:SCRNSAVE.SCR, "Blank screen skjermbeskytter"     ,   5664
   6:SSMARQUE.SCR, "Marquee skjermbeskytter"     ,  17168
   6:SSSTARS.SCR,  "Starfield Simulation skjermbeskytter"       ,  17792
   6:ssflywin.scr, "Flying Windows skjermbeskytter",  16368
   diskspace=56992

[win.bmps]
   6:ARGYLE.BMP,   "Argyle bakgrunn"         ,    630
   6:ARKADE.BMP,   "Arkade bakgrunn"         ,    630
   6:BIKUBE.BMP,   "Bikube bakgrunn"         ,    854
   6:EGYPT.BMP,    "Egypt bakgrunn"          ,    630
   6:FIRKANT.BMP,  "Firkanter bakgrunn"        ,    630
   6:MATTE.BMP,   "Stråmatte bakgrunn"         ,    598
   6:MUR.BMP,   "Mur bakgrunn"         ,    778
   6:MURSTEIN.BMP, "Rød murstein bakgrunn"      ,    630
   6:NAGLER.BMP,   "Nagler bakgrunn"         ,    630
   6:SIKKSAKK.BMP,   "Sikksakk bakgrunn"         ,    630
   6:WINLOGO.BMP,  "Windows Logoer bakgrunn"   ,  38518
   6:DING.WAV,     "Ringeklokke lyd"               ,  11598
   6:KLOKKER.WAV,   "Kirkeklokker lyd"             ,  15920
   6:CANYON.MID,   "Canyon MIDI-sang"         ,  33883
   6:ringin.wav,   "Lyd for innkommende samtale"        ,  10026
   6:ringout.wav,  "Lyd for utgående samtale"        ,   5212
   diskspace=121797

[win.readme]
   3:viktig.wri,   "Allmen viktig"           ,  96512, readme
   3:nettverk.wri, "Viktig om nettverk"          ,  70656
   3:winini.wri,   "Viktig om WIN.INI "           ,  22656
   3:sysini.wri,   "Viktig om SYSTEM.INI "        ,  66176
   3:skrivere.wri, "Viktig om skrivere"          ,  48000
   6:mail.wri,     "Viktig om MS Mail"        ,  41216
   diskspace=345216

; The [*.groups] sections maps a group section to the group name used in
; Program Manager.
;
; Section Name = Progman group name, Min/Max switch. ( 1 = Max, nothing = Min).
;
; This section is used for upgrading from 3.X to 3.1.
[new.groups]
group7=Hovedgruppe,1
group2=Tilbehør
group8=Nettverk
group6=Spill
group1=Oppstart

; This section is for new install.
[progman.groups]
group3=Hovedgruppe,1
group4=Tilbehør
group8=Nettverk
group5=Spill
group1=Oppstart

; Progman DDE control section. This section controls the progman DDE and defines which
; .exe's will be added to which groups. The [progman.groups] sections lists section
; names that each describe the contents of that group.
;
; Description string,  .EXE name, Icon extraction .EXE, Icon extraction index, profile
;
; If the profile field is left NULL, the item will always be added to the group. Otherwise
; the item will only be added if it was installed via the partial install dlg.
;
;
; NOTE: If EXE name is NULL item will be deleted from the group if it exists there.
;

[group3]
"Filbehandling",     WINFILE.EXE
"Kontrollpanel",    CONTROL.EXE
"Utskriftsbehandling",    PRINTMAN.EXE
"Utklippsbok", CLIPBRD.EXE
"MS-DOS-ledetekst",    DOSPRMPT.PIF, PROGMAN.EXE, 9
"Installere Windows",    WINSETUP.EXE
"PIF-redigering",       PIFEDIT.EXE
"Viktig"
"Viktig",          VIKTIG.WRI,,,                              readme
"Utklippstavle"
"Utklippsbehandling"
"Opplæring"
"Windows Installering"
"DOS-ledetekst"

[group4]
"Write",            WRITE.EXE
"Paintbrush",       PBRUSH.EXE,,,                              pbrush
"Terminal",         TERMINAL.EXE,,,                            terminal
"Notisblokk",          NOTEPAD.EXE,,,                             notepad
"Innspilling",         RECORDER.EXE,,,                            recorder
"Kartotek",         CARDFILE.EXE,,,                            cardfile
"Kalkulator",       CALC.EXE,,,                                calc
"Klokke",            CLOCK.EXE,,,                               clock
"Objektinnpakking",  PACKAGER.EXE,,,                            packager
"Tegnkart",    CHARMAP.EXE,,,                             charmap
"Mediaavspilling",     MPLAYER.EXE,,,                             mplayer
"Lydinnspilling",   SOUNDREC.EXE,,,                            soundrec
"WinChat"
"WinMeter"
"NetWatcher"
"Nettvakt"
"Kalender"
"Calendar"

[group5]
"Kabal",        SOL.EXE,,,                                 sol
"Minesveiper",      WINMINE.EXE,,,                             winmine
"Hjerter",           MSHEARTS.EXE,,,                            hearts
; Remove old icons
"FreeCell"

[group1]
"Dr. Watson"

[group2]
"Objektinnpakking",  PACKAGER.EXE,,,                            packager
"Tegnkart",    CHARMAP.EXE,,,                             charmap
"Mediaavspilling",     MPLAYER.EXE,,,                             mplayer
"Lydinnspilling",   SOUNDREC.EXE,,,                            soundrec
"PIF-redigering"
"Write",            WRITE.EXE
; Remove old network icons
"Chat"
"WinChat"
"Teksttelefon"
"WinMeter"
"Måler"
"NetWatcher"
"Nettvakt"
"WinPopup"
"Meldingsvarsler"
"Virtual Disk Status"
"Virtuell diskstatus"
"Fast Mail"
"Ilpost"
"Password List Editor"
"Passordlisteredigering"
"Message Popup Utility"
"Meldingsvarsler"
"Logon/off"
"Kalender"
"Calendar"

[group6]
"Kabal",        SOL.EXE,,,                                 sol
"Minesveiper",      WINMINE.EXE,,,                             winmine
"Hjerter",           MSHEARTS.EXE,,,                            hearts
; Remove old icons
"FreeCell"

[group7]
"Utklippstavle"
"Utklippsbehandling"
"Utklippsbok",  CLIPBRD.EXE
"Installere Windows",    WINSETUP.EXE
"PIF-redigering",       PIFEDIT.EXE
"Viktig",
"Dos-ledetekst",
"DOS-ledetekst",
"Windows Installering",
"DOS-ledetekst",
"MS-DOS-ledetekst",    DOSPRMPT.PIF, PROGMAN.EXE, 9
"Viktig",          VIKTIG.WRI,,,                              readme
"Opplæring"

[group8]
"Nettverksinstallasjon",   "WINSETUP.EXE /Z",,,
"Mail",             MSMAIL.EXE,,,                              msmail
"Mail",             MSMAIL.EXE,,,                              msfax
"Schedule+",        SCHDPLUS.EXE,,,                            schdplus
"Ekstern påloggingstjeneste",    RASSTART.EXE,,,                            rasmac
; Remove old network icons
"Message Popup Utility"

[fonts]
   6:SSERIFE.FON, "MS Sans Serif 8,10,12,14,18,24 (VGA oppl.)", "100,96,96"
   5:SSERIFF.FON, "MS Sans Serif 8,10,12,14,18,24 (8514/a oppl.)", "100,120,120"

   6:COURE.FON, "Courier 10,12,15 (VGA oppl.)", "100,96,96"
   6:COURF.FON, "Courier 10,12,15 (8514/a oppl.)", "100,120,120"

   6:SERIFE.FON, "MS Serif 8,10,12,14,18,24 (VGA oppl.)", "100,96,96"
   5:SERIFF.FON, "MS Serif 8,10,12,14,18,24 (8514/a oppl.)", "100,120,120"

   6:SYMBOLE.FON, "Symbol 8,10,12,14,18,24 (VGA oppl.)", "100,96,96"
   5:SYMBOLF.FON, "Symbol 8,10,12,14,18,24 (8514/a oppl.)", "100,120,120"

   6:SMALLE.FON, "Liten skrift (VGA oppl.)", "100,96,96"
   6:SMALLF.FON, "Liten skrift (8514/a oppl.)", "100,120,120"

   6:ROMAN.FON, "Roman (Plotter)",   "CONTINUOUSSCALING"
   6:SCRIPT.FON, "Script (Plotter)", "CONTINUOUSSCALING"
   6:MODERN.FON, "Modern (Plotter)", "CONTINUOUSSCALING"

[ttfonts]
;
;Font Header file, Description string,       Font file,     FontFamily/Flags
;
; Flags:  0000 = Normal weighted font.
;         0100 = Bolded font.
;         1000 = Italic font.
; NOTE: Flags not currently used.
;
; NOTE: The first letter of each word in the font desctiption string needs
;       to be capitalized.
;
5:ARIAL.FOT,   "Arial (TrueType)",                       5:arial.ttf,   ""
5:ARIALBD.FOT, "Arial Fet (TrueType)",                  5:arialbd.ttf,  "Arial0100"
5:ARIALBI.FOT, "Arial Fet kursiv (TrueType)",           5:arialbi.ttf, "Arial1100"
5:ARIALI.FOT,  "Arial Kursiv (TrueType)",                5:ariali.ttf,  "Arial1000"
5:COUR.FOT,    "Courier New (TrueType)",                 5:cour.ttf,    ""
5:COURBD.FOT,  "Courier New Fet (TrueType)",            5:courbd.ttf,  "Courier0100"
5:COURBI.FOT,  "Courier New Fet kursiv (TrueType)",     5:courbi.ttf,  "Courier1100"
5:COURI.FOT,   "Courier New Kursiv (TrueType)",          5:couri.ttf,   "Courier1000"
5:TIMES.FOT,   "Times New Roman (TrueType)",             5:times.ttf,   ""
5:TIMESBD.FOT, "Times New Roman Fet (TrueType)",        5:timesbd.ttf, "Times New Roman0100"
5:TIMESBI.FOT, "Times New Roman Fet kursiv (TrueType)", 5:timesbi.ttf, "Times New Roman1100"
5:TIMESI.FOT,  "Times New Roman Kursiv (TrueType)",      5:timesi.ttf,  "Times New Roman1000"
5:SYMBOL.FOT,  "Symbol (TrueType)",                      5:symbol.ttf,  ""
5:WINGDING.FOT,"WingDings (TrueType)",                   5:wingding.ttf,""

; If any of these drivers are found in the config.sys file, Setup removes them.
[compatibility]
icache.sys
ibmcache.sys
cache.sys
cache.exe
mcache.sys
fast512.sys

; Known TSRs and drivers which may result in a hang or crash
; during execution of Setup or Windows.
;
; filename = description string
[incompTSR1]
ep.exe      = "Norton Desktop/Windows Erase Protect TSR"
qmaps.sys   = "QMAPS Memory Manager"
qcache.exe  = "386 Max Disk Cache Utility"
cache.exe   = "Disk Cache Utility"
flash.exe   = "Flash Disk Cache Utility"
hyper386.exe= "Hyper Disk Cache Utility"
hyperdkx.exe= "Hyper Disk Cache Utility"
hyper286.exe= "Hyper Disk Cache Utility"
hyperdke.exe= "Hyper Disk Cache Utility"
hyperdkc.exe= "Hyper Disk Cache Utility"
ncache.exe  = "Norton Disk Cache Utility"
ncache2.exe  = "Norton Utilities NCache"
speeddrv.exe  = "Norton Speed Drive"
pc-kwik.exe = "PC-Kwik Disk Cache Utility"
pc-cache.com= "PC Tools Disk Cache Utility"
superpck.exe= "Super PC-Kwik Disk Cache Utility"
vdisk.sys   = "IBM RAM Disk Utility"
allemm4.sys="All Charge 386"
anarkey.com="Anarkey"
vsafe.sys = "Central Point Anti-Virus"
vsafe.com = "Central Point Anti-Virus TSR"
vdefend.sys="PC Tools VDefend"
vdefend.com="PC Tools VDefend"
kbflow.exe="KBFlow TSR by Artisoft"
s-ice.exe="SoftIce"
desktop.exe="PC Tools Desktop TSR"
sk2.exe="Sidekick Version 2.0"
sk.com="Sidekick Version 1.0"
skplus.exe="Sidekick Plus"
print.exe="MS-DOS PRINT Utility"
pyro.exe="Pyro! Screen Saver"
xgaaidos.sys="8514 emulation driver"
asplogin.exe="ASP Integrity Toolkit"
lsallow.exe="Lansight Network Utilities TSR"
lansel.exe="Lansight Network Utilities TSR"
vaccine.exe="Vaccine Antivirus Program"
newspace.exe="Newspace Disk Compression Utility"
newres.exe="Newspace Disk Compression Utility"
tscsi.sys="Trantor T100  SCSI driver"
pcpanel.exe="Lasertools Printer Control Panel"
hpemm386.sys = "HP Expanded Memory Manager"
hpemm486.sys = "HP Expanded Memory Manager"
ramtype.sys  = "Ramtype Utility"
iemm.sys     = "Memory Manager"
ilim386.sys  = "Intel Expanded Memory Emulator"
cmdedit.com  = "Command Line Editor"
hpmm.sys     = "HP Memory Manager"
ced.exe      = "PCED Command Line Editor"
ced.com      = "CED Command Line Editor"
umbpro.sys   = "UMB Pro Memory Manager"
rm386.sys    = "NetRoom Memory Manager"
eimpcs.sys   = "IBM PC Support"
ecyddx.sys   = "IBM PC Support"

; Known TSRs and device drivers which can(!) potentially cause problems
; if running during Setup or Windows
;
; filename = description string
[incompTSR2]
ndosedit.com  = "Command Line Editor"
doscue.com="DOSCUE Command Line Editor"
datamon.exe="PC Tools Datamon"
subst.exe="MS-DOS SUBST Utility"
join.exe="MS-DOS JOIN Utility"
viralert.sys="Data Physician Plus TSR"
graphics.com="MS-DOS GRAPHICS Utility"
le.com="Le Menu Menuing Package"
assign.com="MS-DOS ASSIGN Utility"
append.com="MS-DOS APPEND Utility"
diskmon.exe="Norton Disk Monitoring TSR"
dubldisk.sys="Double Disk Data Compression Utility"
pa.exe = "Printer Assist"
speedfxr.com = "Speedfxr"
pcsxmaem.sys = "pcsxmaem Utility"
xmaem.sys    = "xmaem Utility"
cubitr.exe   = "Cubit"

[block_devices]
tscsi.sys
tcscsi.sys
atdosxl.sys
dmdrvr.bin
drdrive.sys

[Installable.Drivers]
; key         = filename,       type(s),     description, VxD(s), Default Params
msadlib       = 5:msadlib.drv,  "MIDI",      "Ad Lib", 5:vadlibd.386,
lapc1         = 6:mpu401.drv,   "MIDI",      "Roland LAPC1",,
midimapper    = 5:midimap.drv,  "MidiMapper", "MIDI-tilordning",,
mpu401        = 6:mpu401.drv,   "MIDI",      "Roland MPU-401",,
sequencer     = 6:mciseq.drv,   "Sequencer", "[MCI] MIDI Sequencer",,
soundblaster  = 5:sndblst.drv,  "Wave,MIDI", "Creative Labs Sound Blaster 1.0", 5:vsbd.386,, msadlib
soundblaster2 = 5:sndblst2.drv, "Wave,MIDI", "Creative Labs Sound Blaster 1.5", 5:vsbd.386,, msadlib
timer         = 5:timer.drv,    "Timer",     "Timer", 5:vtdapi.386,
thunder       = 5:sndblst2.drv, "Wave", "Media Vision Thunder Board", 5:vsbd.386,, msadlib
wave          = 6:mciwave.drv,  "WaveAudio", "[MCI] Sound",, "4"
cdaudio       = 6:mcicda.drv,   "CDAudio",   "[MCI] CD Audio",,

; This section translates Windows 3.0 OEMSETUP.INF entries to their 3.1
; equivalents. The disk names should be the first entries in the list.

[translate]
WinDiskName=29,"Microsoft Windows 3.0-diskett"
WinDiskName=19,"Windows-diskett nr."
*vddvga=2:vddvga30.386
vgalogo.lgo=2:vgalogo.lgo
vgalogo.rle=2:vgalogo.rle
rgdi.lgo=2:vgalogo.lgo
rgdi.rle=2:vgalogo.rle
vga.gr3=2:vga30.3gr
v7vga.gr3=2:v7vga.3gr
cga40woa.fon=2:cga40woa.fon
cga40850.fon=2:cga40850.fon
cga80woa.fon=2:cga80woa.fon
cga80850.fon=2:cga80850.fon
ega40woa.fon=2:ega40woa.fon
ega40850.fon=2:ega40850.fon
ega80woa.fon=2:ega80woa.fon
ega80850.fon=2:ega80850.fon
vgasys.fon=2:vgasys.fon
vgafix.fon=2:vgafix.fon
vgaoem.fon=2:vgaoem.fon
8514sys.fon=2:8514sys.fon
8514fix.fon=2:8514fix.fon
8514oem.fon=2:8514oem.fon
helve.fon=6:sserife.fon
helvf.fon=5:sseriff.fon
coure.fon=6:coure.fon
courf.fon=6:courf.fon
tmsre.fon=6:serife.fon
tmsrf.fon=5:seriff.fon
symbole.fon=6:symbole.fon
symbolf.fon=5:symbolf.fon
roman.fon=6:roman.fon
script.fon=6:script.fon
modern.fon=6:modern.fon
kbdbe.dll=2:kbdbe.dll
kbduk.dll=2:kbduk.dll
kbdda.dll=2:kbdda.dll
kbdne.dll=2:kbdne.dll
kbdfi.dll=2:kbdfi.dll
kbdfr.dll=2:kbdfr.dll
kbdca.dll=2:kbdca.dll
kbdgr.dll=2:kbdgr.dll
kbdic.dll=2:kbdic.dll
kbdit.dll=2:kbdit.dll
kbdla.dll=2:kbdla.dll
kbdno.dll=2:kbdno.dll
kbdpo.dll=2:kbdpo.dll
kbdsp.dll=2:kbdsp.dll
kbdsw.dll=2:kbdsw.dll
kbdsf.dll=2:kbdsf.dll
kbdsg.dll=2:kbdsg.dll
kbdus.dll=2:kbdus.dll
kbddv.dll=2:kbddv.dll
kbdusx.dll=2:kbdusx.dll
xlat863.bin=2:xlat863.bin
xlat861.bin=2:xlat861.bin
xlat865.bin=2:xlat865.bin
xlat850.bin=2:xlat850.bin
xlat860.bin=2:xlat860.bin
vga863.fon=2:vga863.fon
vga861.fon=2:vga861.fon
vga865.fon=2:vga865.fon
vga850.fon=2:vga850.fon
vga860.fon=2:vga860.fon
win.cnf=1:win.cnf

; Used to update files that already exist on the disk
;
[Update.Files]
0:system,5:sndblst.drv
0:system,5:sndblst2.drv
0:system,6:mpu401.drv
0:system,5:msadlib.drv
0:system,5:vtdapi.386
0:system,5:vsbd.386
0:system,5:vadlibd.386
0:system,6:mcicda.drv
0:system,6:cpqgr3.exe
0:system,6:cpqvga.gr3
0:system,6:pscript.drv

; Used to update dependents of files in the [Update.Files] section.
;
[Update.Dependents]
msadlib.drv = 5:vadlibd.386
sndblst.drv = 5:vsbd.386
sndblst2.drv = 5:vsbd.386

; This section is processed by both the DOS and WINDOWS portions of setup
; for temporarily renaming profile strings during setup. THE RENAME
; OPERATION WILL ONLY TAKE PLACE IF THE ORIGINAL PROFILE STRING EXISTS AND HAS
; A RIGHT HAND SIDE STRING.
;
; .ini file,  section name, temporary profile name, Original profile name.
;
[ini.upd.patches]
  system.ini, Boot,    "olddrivers"    ,"drivers"
  win.ini   , Desktop, "oldwallpaper"  ,"wallpaper"
  system.ini, Boot,    "oldtaskman"    ,"taskman.exe"
  system.ini, Boot,    "wfwshell"           ,"shell"

[setupdisplay]
mach32.drv=2:vga.drv
cirrus.drv=1:svga256.drv
wd.drv=1:svga256.drv
framebuf.drv=1:svga256.drv
tseng.drv=1:svga256.drv
linear8.drv=2:vga.drv
cpqavga.drv=2:vga.drv
ht256sf.drv=2:vga.drv
orchidf.drv=2:vga.drv
s3.drv=2:vga.drv
s3?.drv=2:vga.drv
s3??.drv=2:vga.drv
s3???.drv=2:vga.drv
s3????.drv=2:vga.drv
s3?????.drv=2:vga.drv
s3??????.drv=2:vga.drv
viper_??.drv=2:vga.drv
mach-??.drv=2:vga.drv
m32-??.drv=2:vga.drv

[setupdisplay.fon]
fonts.fon=2:vgasys.fon
fixedfon.fon=2:vgafix.fon
oemfonts.fon=2:vgaoem.fon

; Used by the windows half to shrink the memory needed to hold this pig.
;
[blowaway]
   this line needed

[ini.upd.31]
;
; WARNING: This section only works on win.ini or system.ini !!
;
; .ini file,  section,  old line to be replaced,  new line,  rename operater.
;
; If the "old line to be replaced" field is empty, setup will assume that
; the new line is to be added. The rename operater tells setup to retain the RHS
; of the profile. This is used as a renaming mechanism during upgrades.
; Nb : Simple string substitution is implemented :
;     ?P means any valid MS-DOS path
;
  system.ini, Boot,                               ,   "taskman.exe="
  system.ini, mci,     "waveaudio="               ,   "WaveAudio=mciwave.drv"
  system.ini, mci,     "sequencer="               ,   "Sequencer=mciseq.drv"
  system.ini, mci,     "cdaudio="                 ,   "CDAudio=mcicda.drv"                      
  system.ini, drivers,                            ,   "timer=timer.drv"
  system.ini, drivers,         "midimapper="      ,   "midimapper=midimap.drv"
  system.ini, drivers, "midi=adlib.drv"           ,   "midi=msadlib.drv"          ,rename
  system.ini, drivers, "midi1=adlib.drv"          ,   "midi1=msadlib.drv"         ,rename
  system.ini, drivers, "midi2=adlib.drv"          ,   "midi2=msadlib.drv"         ,rename
  system.ini, drivers, "midi3=adlib.drv"          ,   "midi3=msadlib.drv"         ,rename
  system.ini, drivers, "midi4=adlib.drv"          ,   "midi4=msadlib.drv"         ,rename
  system.ini, 386Enh,       "keyboard=?Pbpvkd.386",
  system.ini, 386Enh,          "keyboard="        ,   "keyboard=*vkd"             ,noclobber
  system.ini, 386Enh,       "device=vpicda.386"   ,   "device=*vpicd"
  system.ini, 386Enh,       "device=vpicd.386"    ,   "device=*vpicd"
  system.ini, 386Enh,                             ,   "device=ifsmgr.386"
  system.ini, 386Enh,                             ,   "device=vcache.386"
  system.ini, vcache,       "minfilecache="       ,   "minfilecache=512", noclobber
  system.ini, 386Enh,       "device=?Pvshare.386" ,   "device=vshare.386"
  system.ini, 386Enh,          "device=*vhd"      ,   "device=*BLOCKDEV", rename
  system.ini, 386Enh,          "device=apix.386"
  system.ini, 386Enh,          "device=*vpd"      ,
  system.ini, 386Enh,          "device=vpd.386"   ,
  system.ini, 386Enh,          "device=vdmad.386" ,   "device=*vdmad"
  system.ini, 386Enh,          "device=vdmadx.386",   "device=*vdmad"
  system.ini, 386Enh,          "device=vcd.386"   ,   "device=*vcd", rename
  system.ini, 386Enh,       "device=vndis2d.386"  ,   
  system.ini, 386Enh,                             ,   "device=*pagefile"
  system.ini, 386Enh,       "device=?Pvtdapi.386" ,   "device=vtdapi.386"
  system.ini, 386Enh,                             ,   "device=vcomm.386"
  system.ini, 386Enh,       "device=ns8250.386"   ,   "device=serial.386"
  system.ini, 386Enh,                             ,   "device=serial.386"
  system.ini, 386Enh,       "device=comlpt.386"   ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=vpmtd.386"
  system.ini, NonWindowsApp,"localtsrs="          ,   "localtsrs=dosedit,ced"  ,noclobber
  system.ini, 386Enh,       "COM3Irq="            ,   "COM3Irq=4", noclobber
  system.ini, 386Enh,       "COM3Base="           ,   "COM3Base=03E8", noclobber
  system.ini, 386Enh,       "COM4Irq="            ,   "COM4Irq=3", noclobber
  system.ini, 386Enh,       "COM4Base="           ,   "COM4Base=02E8", noclobber
  win.ini   , Sounds,  "SystemDefault="           ,   "SystemDefault=ding.wav, Standard tone"      ,noclobber
  win.ini   , Sounds,  "SystemExclamation="       ,   "SystemExclamation=ding.wav, Merk!"  ,noclobber
  win.ini   , Sounds,  "SystemStart="             ,   "SystemStart=klokker.wav, Windows oppstart"            ,noclobber
  win.ini   , Sounds,  "SystemExit="              ,   "SystemExit=klokker.wav, Windows avslutning"       ,noclobber
  win.ini   , Sounds,  "SystemHand="              ,   "SystemHand=klokker.wav, Kritisk avslutning"        ,noclobber
  win.ini   , Sounds,  "SystemQuestion="          ,   "SystemQuestion=klokker.wav, Spørsmål"         ,noclobber
  win.ini   , Sounds,  "SystemAsterisk="          ,   "SystemAsterisk=klokker.wav, Stjerne"         ,noclobber
  win.ini   , "mci extensions",                   ,   "wav=waveaudio"
  win.ini   , "mci extensions",                   ,   "mid=sequencer"
  win.ini   , "mci extensions",                   ,   "rmi=sequencer"
  win.ini   , FontSubstitutes,                    ,   "Helv=MS Sans Serif"
  win.ini   , FontSubstitutes,                    ,   "Tms Rmn=MS Serif"
  win.ini   , FontSubstitutes, "Courier=Courier New" ,
  win.ini   , FontSubstitutes,                    ,   "Times=Times New Roman"
  win.ini   , FontSubstitutes,                    ,   "Helvetica=Arial"
  ;
  ; Remove these Win 3.0 font entries from win.ini because they have either
  ; been replaced or removed for Win 3.1
  ;
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (CGA-oppl. )="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (EGA-oppl.)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (VGA-oppl.)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (8514/a )="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (CGA-oppl.)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (EGA-oppl.)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (VGA-oppl.)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (8514/a-oppl.)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "TrueType" rather than "Scalable"
  ;
  win.ini, Fonts, "Arial (Skalerbar)="
  win.ini, Fonts, "Arial Fet (Skalerbar)="
  win.ini, Fonts, "Arial Fet kursiv (Skalerbar)="
  win.ini, Fonts, "Arial Kursiv(Skalerbar)="
  win.ini, Fonts, "Courier (Skalerbar)="
  win.ini, Fonts, "Courier Fet (Skalerbar)="
  win.ini, Fonts, "Courier Kursiv (Skalerbar)="
  win.ini, Fonts, "Courier Fet kursiv (Skalerbar)="
  win.ini, Fonts, "Courier (TrueType)"
  win.ini, Fonts, "Courier Fet (TrueType)"
  win.ini, Fonts, "Courier Fet kursiv (TrueType)"
  win.ini, Fonts, "Courier Kursiv (TrueType)"
  win.ini, Fonts, "Times New Roman (Skalerbar)="
  win.ini, Fonts, "Times New Roman Fet (Skalerbar)="
  win.ini, Fonts, "Times New Roman Fet kursiv (Skalerbar)="
  win.ini, Fonts, "Times New Roman Kursiv (Skalerbar)="
  win.ini, Fonts, "Symbol PS (Skalerbar)="
  win.ini, Fonts, "Symbol (Skalerbar)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "Plotter" rather than "All res" Also, 8 point was
  ; added to the EGA res courier so we remove the old "Courier 10,12,15" font.
  ;
  win.ini, Fonts, "Roman (Alle oppl.)="
  win.ini, Fonts, "Script (Alle oppl.)="
  win.ini, Fonts, "Modern (Alle oppl.)="
  win.ini, Fonts, "Courier 10,12,15 (EGA-oppl.)="
  ;
  ; The following lines will cause the MS-DOS half of setup to effectivly
  ; rename the [Fonts] section in win.ini. Setup does this by adding the
  ; [wt4gpi8s56bz] string to the [Fonts] section and then deleting the
  ; [Fonts] section string. Later, in the windows half of setup, it will
  ; rename [wt4gpi8s56bz] back to [Fonts]. Do not change these names!
  ;
  win.ini, Fonts,              , "[wt4gpi8s56bz]"
  win.ini, Fonts,   "[Fonts]"  ,

  ; The following line makes USER skip persistent net connections
  ; USER immediately deletes the entry so it is a onetime thing.
  win.ini, windows,, "SetupWin=1"

  ; The following lines fix problems with APPS
  win.ini, Compatibility,"NOTSHELL=", "NOTSHELL=0x0001"
  win.ini, Compatibility,"WPWINFIL=", "WPWINFIL=0x0006"
  win.ini, Compatibility,"CCMAIL=", "CCMAIL=0x0008"
  win.ini, Compatibility,"AMIPRO=", "AMIPRO=0x0010"
  win.ini, Compatibility,"REM=", "REM=0x8022"
  win.ini, Compatibility,"PIXIE=", "PIXIE=0x0040"
  win.ini, Compatibility,"CP=", "CP=0x0040"
  win.ini, Compatibility,"JW=", "JW=0x42080"
  win.ini, Compatibility,"TME=", "TME=0x0100"
  win.ini, Compatibility,"VB=", "VB=0x0200"
  win.ini, Compatibility,"WIN2WRS=", "WIN2WRS=0x1210"
  win.ini, Compatibility,"PACKRAT=", "PACKRAT=0x0800"
  win.ini, Compatibility,"VISION=", "VISION=0x0040"
  win.ini, Compatibility,"MCOURIER=", "MCOURIER=0x0800"
  win.ini, Compatibility,"_BNOTES=", "_BNOTES=0x24000"
  win.ini, Compatibility,"MILESV3=", "MILESV3=0x1000"
  win.ini, Compatibility,"PM4=", "PM4=0x2000"
  win.ini, Compatibility,"DESIGNER=", "DESIGNER=0x2000"
  win.ini, Compatibility,"PLANNER=", "PLANNER=0x2000"
  win.ini, Compatibility,"DRAW=", "DRAW=0x2000"
  win.ini, Compatibility,"WINSIM=", "WINSIM=0x2000"
  win.ini, Compatibility,"CHARISMA=", "CHARISMA=0x2000"
  win.ini, Compatibility,"PR2=", "PR2=0x2000"
  win.ini, Compatibility,"PLUS=", "PLUS=0x1000"
  win.ini, Compatibility,"ED=", "ED=0x00010000"
  win.ini, Compatibility,"PP=",
  win.ini, Compatibility,"APORIA=", "APORIA=0x0100"
  win.ini, Compatibility,"EXCEL=", "EXCEL=0x1000"
  win.ini, Compatibility,"GUIDE=", "GUIDE=0x1000"
  win.ini, Compatibility,"NETSET2=", "NETSET2=0x0100"
  win.ini, Compatibility,"W4GL=", "W4GL=0x4000"
  win.ini, Compatibility,"W4GLR=","W4GLR=0x4000"
  win.ini, Compatibility,"TURBOTAX=","TURBOTAX=0x00080000"
  win.ini   , Sounds,  "RingIn="                  ,   "RingIn=ringin.wav,WinChat innkommende samtale"     ,noclobber
  win.ini   , Sounds,  "RingOut="                 ,   "RingOut=ringout.wav,WinChat utgående samtale"   ,noclobber
  win.ini   , Network, "DefaultDialogs="

  ; defaults to put up net warning messages
  win.ini, windows, "NetMessage=", "NetMessage=Yes"
  win.ini, windows, "NetWarn=",    "NetWarn=1"

  ; remove beta2 lines
  win.ini, PrinterPorts,          "Microsoft Mail Lokalfaks="
  win.ini, devices,               "Microsoft Mail Lokalfaks="

[system]
; The various SYSTEM.DRV, SOUND.DRV, COMM.DRV
;
; These   are the   drivers   which may vary from system to system,
; but are selected only   by the [machine] menu -- they do not have
; special menus   for their selection.
system   =    2:system.drv
sound    =    2:mmsound.drv
comm     =    2:comm.drv
hpsystem =    2:hpsystem.drv

[machine]
; This section defines default machine selections.  The   system
; description from each   entry will appear in the initial machine
; selection menu of Setup.
;
; An * means that setup will use the device specified here and override
; the detected device, this applies to keyboards, mice, and displays.
;
; Each entry contains a   descriptive line for the system-selection menu,
; followed by the filenames of the drivers in fixed order.
;
;      Field      1         2           3        4         5          6         7          8         9             10     11
; prof_str      = Desc Str, System drv, kbd drv, kbd type, mouse drv, disp drv, sound drv, comm drv, himem switch, ebios, cookies
;
ibm_compatible  = "MS-DOS-system",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,
ast_386_486     = "AST Premium 386/25 og 386/33 (CUPID)",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,ast_cookz
at_and_t        = "AT&T PC",system,kbd,t4s0enha,nomouse,!olibw,sound,comm,,ebios,
everex_386_25   = "Everex Step 386/25",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,everex_cookz
hewlett_packard = "Alle Hewlett-Packard-maskiner",hpsystem,kbdhp,t4s0enha,nomouse,egahires,sound,comm,,hpebios,
ibm_ps2_70p     = "IBM PS/2 Modell P70",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
ibm_ps2_l40sx   = "IBM PS/2 Modell L40sx",system,kbd,!t4s0enha,nomouse,vga,sound,comm,,ebios,ibml40_cookz
ncr_386sx       = "NCR: alle 80386 og 80486 baserte datamaskiner",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,ncr386sx_cookz
nec_pm_sx+      = "NEC PowerMate SX Plus",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,nec_pm_cookz
nec_prospeed    = "NEC ProSpeed 386",system,kbd,t4s0enha,nomouse,!egahires,sound,comm,,ebios,
toshiba_1600    = "Toshiba 1600",system,kbd,t4s0enha,nomouse,egahires,sound,comm,"TOSHIBA",ebios,
toshiba_5200    = "Toshiba 5200",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,t5200_cookz
zenith_386      = "Zenith: alle 80386-baserte datamaskiner",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,zen386_cookz
att_nsx_20      = "AT&T NSX 20 : Safari notebook",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios
apm             = "MS-DOS-system med APM",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,apm_cookz
apm_sl          = "Intel 386SL-basert system med APM",system,kbd,t4s0enha,nomouse,egahires,sound,comm,,ebios,apm_sl_cookz

;
; Cookies as specified in machine section
;
; ini file, section, cookie, needed file
;
; specialdriver,,,file will add an installable driver to [boot]drivers=
;

[apm_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp

[apm_sl_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp
system.ini,power.drv,"OptionsDLL=sl.dll",2:sl.dll
,,,2:sl.hlp

[ast_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[everex_cookz]
system.ini,386enh,"8042ReadCmd=A2,1,F",
system.ini,386enh,"8042ReadCmd=A3,1,F",
system.ini,386enh,"8042WriteCmd=B3,8,F",

[ibml40_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"DMAbuffersize=64"


[ncr386sx_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"emmexclude=C600-C7FF",

[nec_pm_cookz]
system.ini,386enh,"VirtualHDirq=NO",

[t5200_cookz]
system.ini,386enh,"emmexclude=C000-C7FF",

[zen386_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[special_adapter]
eitherlink  = DMAbuffersize,32          ; Needed if EitherLink MC is detected.

[ebios]
ebios       = x:*ebios               ; Required for most 386 machines.
hpebios     = 2:hpebios.386,x:*ebios ; Required for HP 386 machines.

;
; Language DLL must be installed for non US installation.
;
; profile = language DLL, DLL description, language ID (ilanguage)
;
[language]
dan = 2:langsca.dll, "Dansk"                              ,1030
enu =                     , "Engelsk (amerikansk)"             ,1033
eng = 2:langeng.dll, "Engelsk (internasjonal)" ,2057
fin = 2:langsca.dll, "Finsk"                     ,1035
fra = 2:langfrn.dll, "Fransk"                              ,1036
frc = 2:langeng.dll, "Fransk-kanadisk"       ,3084
nld = 2:langdut.dll, "Hollandsk"                               ,1043
isl = 2:langsca.dll, "Islandsk"                           ,1039
ita = 2:langeng.dll, "Italiensk"                     ,1040
nor = 2:langsca.dll, "Norsk"                           ,1044
ptg = 2:langeng.dll, "Portugisisk"                       ,2070
esp = 2:langspa.dll, "Spansk"             ,1034
esn = 2:langeng.dll, "Spansk (moderne)"      ,3082
sve = 2:langsca.dll, "Svensk"                ,1053
deu = 2:langger.dll, "Tysk"                              ,1031

; files included on disk but not referenced in anywhere in setup.inf
[keepers]
    1:install.exe     ; dossetup program
    1:setup.inf     ; setup information file
    1:xmsmmgr.exe   ; xms manager
    1:setup.shh     ; automatic setup template file
    6:prtupd.inf    ; Printer driver update file
    9:admincfg.exe  ; Network Admin Utility 
    9:pss.inf       ; PSS Support Protocol File

; List of 3rd party drivers that replace *wdctrl
; Setup will not add *wdctrl if one of these is present
[*wdctrl]
    cpqwdctl.386    ; compaq wd controller
    ultraisa.386    ; ultra store wd controller
    fdscsi.386      ; future domain scsi
    hc_win.386      ; quantum hardcard
    cam_win.386     ; quantum passport scsi
    scsi_win.386    ; quantum passport scsi

; List of 3rd party drivers that replace *int13
; Setup will not add *int13 if one of these is present
[*int13]
    cpqint13.386    ; used with compaq cpqwdctl.386
    qtmint13.386    ; used with quantum hc_win.386, cam_win.386, and scsi_win.386
    int13.386       ; used with future domain

; List of 3rd party drivers that replace *vpd
; Setup will not add *vpd if one of these is present
[*vpd]
    wpsljvpd.386
